Revision 5.01 – November 30, 2005
S5335 – PCI Bus Controller, 3.3V
Data Sheet
Cache Line Size Register (CALN)
This register is hardwired to 0. The cache line configu-
ration register is used by the system to define the
cache line size in double-word (64-bit) increments.
This controller does not use the “Memory Write and
Invalidate” PCI bus cycle commands when operating
in the bus master mode, and therefore does not inter-
nally require this register. When operating in the target
mode, this controller does not have the connections
necessary to “snoop” the PCI bus and accordingly
cannot employ this register in the detection of burst
transfers that cross a line boundary.
Cache Line Size
0Ch
Register Name:
Address Offset:
Power-up value:
Boot-load:
00h, hardwired
not used
Read Only
8 bits
Attribute:
Size:
Figure 13. Cache Line Size Register
7
0
00h
Cache Line Size (RO)
AMCC Confidential and Proprietary
DS1657 40