Chapter 9: Using User Flash Memory in MAX II Devices
9–47
Referenced Documents
Referenced Documents
This chapter references the following documents:
■
In-System Programmability Guidelines for MAX II Devices chapter in the MAX II
Device Handbook
■
MAX II Architecture chapter in the MAX II Device Handbook
Document Revision History
Table 9–17 shows the revision history for this chapter.
Table 9–17. Document Revision History
Date and Revision
October 2008,
version 1.8
Changes Made
Summary of Changes
■ Updated “Using and Accessing UFM Storage”, “Oscillator”, “UFM
Operating Modes”, “ALTUFM SPI Timing Specification”, and “ALTUFM
Parallel Interface Timing Specification” sections.
—
■ Updated New Document Format.
December 2007,
version 1.7
■ Corrected Figure 9–3.
—
■ Added “Referenced Documents”.
December 2006,
version 1.6
■ Changed signal format in Table 9–4. Added Revision History section.
—
—
2
August 2005,
version 1.5
■ Added I C row to Table 9-3.
■ Added a new Inter-Integrated Circuit section.
■ Added a new Memory Initialization for the altufm_i2c Megafunction
section
■ Updated Figure 9-39.
June 2005,
version 1.4
■ Added the Instantiating the Oscillator without the UFM section.
■ Updated Figure 9-14.
—
—
January 2005,
version 1.3
■ Previously published as Chapter 10. No changes to content.
© October 2008 Altera Corporation
MAX II Device Handbook