15–2
Chapter 15: Using the Agilent 3070 Tester for In-System Programming
Agilent 3070 Development Flow without the PLD ISP Software
Agilent 3070 Development Flow without the PLD ISP Software
Programming devices with the Agilent 3070 tester (using a Serial Vector Format (.svf)
File) without Agilent’s PLD ISP software requires the following steps. Refer to
Figure 15–1.
Agilent 3070 Development Flow for In-System Programming Using SVF File without PLD ISP
Start
Step 1
Create a
Printed Circuit Board
(PCB) and Test Fixture
Designer
Create a
Serial
Vector
Format
(.svf) File
Step 2
Step 3
Convert the SVF File to
Pattern Capture Format
(.pcf) File
Test Engineer
Step 4
Create Executable
Tests from Files
Step 5
Compile Executable
Tests
Debug
Step 6
Programming
Successful?
No
Yes
Done