Introduction
voltage requirements, MAX II and MAX II G devices have identical
pin-outs and timing specifications.
Table 1–5
shows the external supply
voltages supported by the MAX II family.
Table 1–5. MAX II External Supply Voltages
EPM240
EPM570
EPM1270
EPM2210
3.3 V, 2.5 V
1.5 V, 1.8 V, 2.5 V, 3.3 V
Devices
EPM240G
EPM1270G
EPM2210G
EPM240Z
EPM570Z
(1)
1.8 V
1.5 V, 1.8 V, 2.5 V, 3.3 V
MultiVolt core external supply voltage (V
CCINT
)
(2)
MultiVolt I/O interface voltage levels (V
CCIO
)
Notes to
Table 1–5:
(1)
(2)
MAX IIG and MAX IIZ devices only accept 1.8 V on their
VCCINT
pins. The 1.8-V V
C C I N T
external supply powers
the device core directly.
MAX II devices operate internally at 1.8 V.
Referenced
Documents
This chapter references the following documents:
■
■
DC and Switching Characteristics
chapter in the
MAX II Device
Handbook
MAX II Logic Element to Macrocell Conversion Methodology
white paper
Altera Corporation
December 2007
1–5
MAX II Device Handbook, Volume 1