欢迎访问ic37.com |
会员登录 免费注册
发布采购

EP2C8F256I8N 参数 Datasheet PDF下载

EP2C8F256I8N图片预览
型号: EP2C8F256I8N
PDF下载: 下载PDF文件 查看货源
内容描述: Cyclone II器件手册,卷1 [Cyclone II Device Handbook, Volume 1]
分类和应用:
文件页数/大小: 470 页 / 5765 K
品牌: ALTERA [ ALTERA CORPORATION ]
 浏览型号EP2C8F256I8N的Datasheet PDF文件第42页浏览型号EP2C8F256I8N的Datasheet PDF文件第43页浏览型号EP2C8F256I8N的Datasheet PDF文件第44页浏览型号EP2C8F256I8N的Datasheet PDF文件第45页浏览型号EP2C8F256I8N的Datasheet PDF文件第47页浏览型号EP2C8F256I8N的Datasheet PDF文件第48页浏览型号EP2C8F256I8N的Datasheet PDF文件第49页浏览型号EP2C8F256I8N的Datasheet PDF文件第50页  
Global Clock Network & Phase-Locked Loops  
Dedicated Clock Pins  
Larger Cyclone II devices (EP2C15 and larger devices) have 16 dedicated  
clock pins (CLK[15..0], four pins on each side of the device). Smaller  
Cyclone II devices (EP2C5 and EP2C8 devices) have eight dedicated clock  
pins (CLK[7..0], four pins on left and right sides of the device). These  
CLKpins drive the global clock network (GCLK), as shown in  
Figures 2–11 and 2–12.  
If the dedicated clock pins are not used to feed the global clock networks,  
they can be used as general-purpose input pins to feed the logic array  
using the MultiTrack interconnect. However, if they are used as general-  
purpose input pins, they do not have support for an I/O register and  
must use LE-based registers in place of an I/O register.  
Dual-Purpose Clock Pins  
Cyclone II devices have either 20 dual-purpose clock pins,  
DPCLK[19..0] or 8 dual-purpose clock pins, DPCLK[7..0]. In the  
larger Cyclone II devices (EP2C15 devices and higher), there are  
20 DPCLK pins; four on the left and right sides and six on the top and  
bottom of the device. The corner CDPCLK pins are first multiplexed before  
they drive into the clock control block. Since the signals pass through a  
multiplexer before feeding the clock control block, these signals incur  
more delay to the clock control block than other DPCLK pins that directly  
feed the clock control block. In the smaller Cyclone II devices (EP2C5 and  
EP2C8 devices), there are eight DPCLK pins; two on each side of the device  
(see Figures 2–11 and 2–12).  
A programmable delay chain is available from the DPCLK pin to its fan-  
out destinations. To set the propagation delay from the DPCLK pin to its  
fan-out destinations, use the Input Delay from Dual-Purpose Clock Pin  
to Fan-Out Destinations assignment in the Quartus II software.  
These dual-purpose pins can connect to the global clock network for  
high-fanout control signals such as clocks, asynchronous clears, presets,  
and clock enables, or protocol control signals such as TRDY and IRDY for  
PCI, or DQS signals for external memory interfaces.  
2–20  
Cyclone II Device Handbook, Volume 1  
Altera Corporation  
February 2007  
 复制成功!