2–14
Chapter 2: Board Components
Off-Chip EEPROM
Table 2–18 lists the user-defined LED component reference and the manufacturing
information.
Table 2–18. User-Defined LED Component Reference and Manufacturing Information
Board Reference
Device Description
Manufacturer
Manufacturer Part Number Manufacturer Website
SML-LX1206GC-TR www.lumex.com
D7, D8
Green LEDs
Lumex, Inc.
Off-Chip EEPROM
This section describes the board's EEPROM interface support and also their signal
names, types, and connectivity relative to the MAX V CPLD device. The board
include footprints for you to mount the following EEPROM device:
■
I2C EEPROM
SPI EEPROM
■
1
The MAX V CPLD development board only provide the EEPROM device footprints.
However, the board test system EEPROM function is developed based on the
EEPROM components described in this section.
I2C EEPROM
Board reference U6 is a footprint to mount an I2C EEPROM device onto the
development board.
Table 2–19 lists the I2C EEPROM device pin assignments, signal names, and functions.
The signal names and types are relative to the MAX V CPLD device in terms of I/O
setting and direction.
Table 2–19. I2C EEPROM Pin Assignments, Schematic Signal Names, and Functions
Board
Reference
MAX V CPLD Device
Pin Number
Description
Schematic Signal I/O Standard
Name
Clock to synchronize the data transfer to and
from the device.
U6.1
U6.2
I2C_PROM_SCL
T13
R13
Bidirectional serial data pin to transfer
addresses and data into and out of the
device.
I2C_PROM_SDA
Write-protect pin.
3.3-V
■ Tied to Vss: Normal operation (read or
write to the entire memory of 000-3FF).
U6.5
I2C_PROM_WP
—
■ Tied to Vcc: Write operation disabled (the
entire memory is write-protected). Read
operation is not affected.
MAX V CPLD Development Board Reference Manual
January 2011 Altera Corporation