[AK4706]
■ INT Function and Mask Options (09H: D7, D4-D1)
Changes of the 08H status can be monitored via the INT pin. The INT pin is the open drain output and goes “L” for
2μsec(typ.) when the status of 08H is changed. This pin should be connected to VD2 (typ. 5V) through 10kohm resistor.
MTV bit, MVC bit, MCOMN bit, MFVCR bit and MSVCR bit control the reflection of the status change of these
monitors onto the INT pin from report to prevent to masks each monitor.
AK4706
VD2
R=10kΩ
INT
uP
Figure 9. INT pin
MVC: VCMON Mask. Refer Table 33
MTV: TVMON Mask. Refer Table 32
MCOMN: Refer Table 31
AUTO
(00H D3)
TVMON
(08H D4)
MTV
(09H D4)
INT
No Change
No Change
Change
0
1
0
1
Hi-Z
Hi-Z
0
0
0
0
Generates “L” Pulse
Hi-Z
Change
No Change
No Change
Change
0
1
0
1
Hi-Z
Hi-Z
1
1
1
1
Generates “L” Pulse
Generates “L” Pulse
Change
Table 32. TV Monitor Mask
AUTO
(00H D3)
VCMON
(08H D3)
MVC
(09H D3)
INT
0
0
0
0
No Change
No Change
Change
0
1
0
1
Hi-Z
Hi-Z
Generates “L” Pulse
Hi-Z
Change
1
1
1
1
No Change
No Change
Change
0
1
0
1
Hi-Z
Hi-Z
Generates “L” Pulse
Generates “L” Pulse
Change
Table 33. VCR Monitor Mask
MFVCR: FVCR Monitor mask.
0: Change of MFVCR is reflected to INT pin. (default)
1: Change of MFVCR is NOT reflected to INT pin.
MSVCR: SVCR1-0 Monitor mask
0: Change of SVCR1-0 is reflected to INT pin. (default)
1: Change of SVCR1-0 is NOT reflected to INT pin.
MS0507-E-01
2010/09
- 37 -
AKM [ ASAHI KASEI MICROSYSTEMS ]
