[AK4646]
ABSOLUTE MAXIMUM RATINGS
(AVSS=DVSS=SVSS=0V; Note 3)
Parameter
Symbol
min
max
Units
Power
Analog
Supplies:
AVDD
4.6
V
−0.3
Digital
Speaker-Amp
|AVSS – DVSS|
DVDD
SVDD
ΔGND1
ΔGND2
IIN
VINA
VIND
Ta
Ta
Ta
Tstg
Pd1
4.6
4.6
0.3
0.3
V
V
V
V
mA
V
−0.3
−0.3
-
-
-
−0.3
−0.3
−30
−30
−30
−65
-
(Note 4)
(Note 4)
|AVSS – SVSS|
Input Current, Any Pin Except Supplies
Analog Input Voltage (Note 5)
Digital Input Voltage (Note 6)
±10
AVDD+0.3
DVDD+0.3
V
AK4646EN
85
85
70
150
450
°C
°C
°C
°C
mW
Ambient Temperature
(Note 7)
(Note 8)
(powered applied)
AK4646EZ
Storage Temperature
Maximum Power Dissipation (Note 9)
Note 3. All voltages are with respect to ground.
Note 4. AVSS, DVSS and SVSS must be connected to the same analog ground plane.
Note 5.MIN, RIN2/IN2−, LIN2/IN2+, LIN1/IN1−, RIN1/IN1+ pins
Note 6. PDN, CSN, CCLK, CDTIO, SDTI, LRCK, BICK, MCKI pins
Pull-up resistors at SDA and SCL pins should be connected to DVDD or less voltage.
Note 7. When the exposed pad on the bottom surface of the package is connected to the ground.
Note 8. When the exposed pad on the bottom surface of the package is open.
Note 9. In case that PCB wiring density is 100%. This power is the AK4646 internal dissipation that does not include
power of externally connected speaker.
WARNING: Operation at or beyond these limits may result in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
RECOMMENDED OPERATING CONDITIONS
(AVSS=DVSS=SVSS=0V; Note 3)
Parameter
Power Supplies
Symbol
AVDD
DVDD
min
2.2
1.6
2.2
-
typ
3.3
3.3
3.3
-
Max
3.6
3.6
Units
V
V
V
V
Analog
(Note 10) Digital
SPK-Amp (Note 11)
SVDD
4.0
Difference
+0.3
+0.3
+0.8
DVDD−AVDD
DVDD−SVDD
AVDD−SVDD
-
-
-
-
V
V
Note 3. All voltages are with respect to ground.
Note 10. The power-up sequence between AVDD, DVDD and SVDD is not critical. When AVDD or SVDD is powered
OFF, the power supply current of DVDD at power-down mode may be increased. When the power supplies are
partially powered OFF, the AK4646 must be reset by bringing PDN pin “L” after these power supplies are
powered ON again.
Note 11. SVDD = 2.2 ∼ 3.6V when 8Ω dynamic speaker is connected to the AK4646.
* AKM assumes no responsibility for the usage beyond the conditions in this datasheet.
MS0557-E-05
2011/01
- 7 -
AKM [ ASAHI KASEI MICROSYSTEMS ]
