A4052
BATTERY MANAGEMENT
AiT Semiconductor Inc.
www.ait-ic.com
1A IS COMPATIBLE WITH THE USB INTERFACE,
LINEAR BATTERY MANAGEMENT CHIP
The large current output design
Since the A4052 using the internal constant power technology, therefore , when the input VIN and BAT
pressure is too large , will lead to smaller the BAT voltage range of the maximum current , so that the charging
time becomes longer , in order to make the maximum current charging interval larger by an external resistor
or Schottky methods to achieve.
The assumption the A4052 of PSOP8 inside the package the maximum allowable power 1.2W, maximum
charge current is set to 1.2A. If uses a resistive, we assume that the use of the resistance of 0.5Ω (1W), High
current charging, the voltage drop across the resistor is 0.5*1.2=0.6V. The A4052 real operating voltage is
4.4V. Thus, in this state, (VIN-VBAT) *1.2<1.2W, therefore VBAT>3.6V,The battery voltage is above 3.6V 1.2A
charging support. Below 3.6V, the A4052 will automatically reduce the charge current to maintain the chip
internal power balance.
If Schottky similar calculation can be made , according to the Schottky voltage drop at different current .
In addition, in the high-current applications need to pay attention A4052 PCB layout design must consider
increasing EXPOSED PAD area , and will be connected to the EXPOSED PAD to GND in order to improve
the thermal performance , and ensure the stable operation of the chip .
REV1.0
- OCT 2013 RELEASED -
- 9 -