Series AMLD-Z
Up to 1000mA | LED Driver
General Specifications
Parameters
Switching frequency
Operating temperature
Storage temperature
Derating
Conditions
100% load
Typical
20 - 500
Maximum
Units
KHz
oC
-40 to +85
-40 to +150
oC
See derating curve
Maximum case temperature
Thermal Impedance
Cooling
110
95
oC
Free air convection
+30
oC/W
Free air convection
Humidity
% RH
Case material
Weight
Non-Conductive Black Plastic (UL94-V0 rated)
12.5
g
Dimensions (L x W x H)
MTBF
Maximum Soldering Temperature
NOTES:
1.25 x 0.80 x 0.49 inches
31.75 x 20.32 x 12.45 mm
> 950 000hrs (MIL-HDBK-217 F at +25 oC)
1.5mm from case for 10sec.
260
oC
1. Reversed polarity at the input power will damage the driver. The input ground must not be connected to the negative output.
2. Leave the pin VADJ opened if not used, grounding VADJ will shut the driver off, connecting VADJ to +Vin will damage the driver.
3. Maximum output open voltage is equal to input voltage.
Safety Specifications
Parameters
Agency approvals
CE
EN 55015 (CISPR22)
EN 61547
IEC 61000-4-2 (Perf. Criteria A)
IEC 61000-4-3 (Perf. Criteria A)
IEC 61000-4-4 (Perf. Criteria A)
IEC 61000-4-5 (Perf. Criteria A)
IEC 61000-4-6 (Perf. Criteria A)
IEC 61000-4-8 (Perf. Criteria A)
Standards
Pin Out Specifications
Pin
2
3
4
Single
- V Input
- V Input
Vadj
- DC Supply
- DC Supply
PWM/ON/OFF or not used
LED Cathode connection
LED Cathode connection
LED Anode connection
LED Anode connection
+ DC Supply
9
- V Output
- V Output
+ V Output
+ V Output
+ V Input
+ V Input
11
14
16
22
23
+ DC Supply
www.aimtec.com
F 051e R12.C
Tel: +1 514 620 2722
2 of 13
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
AIMTEC [ AIMTEC ]
