connectored 62.5/125 µm fiber
optic cable.
flexible-body duplex SC connec-
tored cable. Hewlett-Packard
offers two such compatible
Contact your local Hewlett-
Packard Component Field Sales
Office for information on how to
obtain PCB layouts, test boards
and demo boards for the 1x9
transceivers.
2. HFBR-0303 - FDDI
Duplex SC connectored jumper
cable assemblies to assist you in
the evaluation of these trans-
ceiver products. These cables
may be purchased from HP with
the following part numbers.
Evaluation Kit
This kit consists of one HFBR-
5103, one 2x11 to 1x9 pinout
adapter card, one 1x13 to 1x9
pinout adapter card, and one
three meter duplex SC to MIC/
Receptacle connectored 62.5/
125 µm fiber optic cable.
1. HFBR-BKD001
Hewlett-Packard has available
three evaluation kits for the 1x9
transceivers. The purpose of
these kits is to provide the neces-
sary materials to evaluate the
performance of the HFBR-510X
family in a pre-existing 1x13 or
2x11 pinout system design
A duplex cable 1 meter long
assembled with 62.5/125 µm
fiber and Duplex SC connector
plugs on both ends.
3. HFBR-0319 Evaluation Test
Fixture Board
This test fixture converts +5 V
ECL 1x9 transceivers to –5 V
ECL BNC coax connections so
that direct connections to
industry standard fiber optic
test equipment can be
2. HFBR-BKD010
A duplex cable 10 meters long
assembled with 62.5/125 µm
fiber and Duplex SC connector
plugs on both ends.
configuration or when connec-
tored to various test equipment.
accomplished.
1. HFBR-0305 - ATM
Evaluation Kit
This kit consists of one HFBR-
5205, one 1x13 to 1x9 pinout
adapter card, and one three
meter duplex SC to duplex ST
Hewlett-Packard recommends for
optimal coupling the use of
Hewlett-Packard recommends the
use of Duplex Push-Pull
connectored cable for the most
repeatable optical power coupling
performance.
5
HFBR-5103/-5104/-5105
Hewlett-Packard offers two such
compatible Duplex Push-Pull ST
connectored jumper cable
SERIES
4
assemblies to assist you in your
evaluation of these products.
3
-10
2.5 x 10
BER
BER
2
1
0
These cables may be purchased
from HP with the following part
numbers.
-12
1.0 x 10
1. HFBR-XXX001
A duplex cable 1 meter long,
assembled with 62.5/125 µm
fiber and Duplex Push-Pull ST
connector plugs on both ends.
-4
-3
-2
-1
0
1
2
3
4
EYE SAMPLING TIME POSITION (ns)
CONDITIONS:
1.T = 25° C
A
2. V
= 5 Vdc
CC
2. HFBR-XXX010
3. INPUT OPTICAL RISE/FALL TIMES = 1.0/2.1 ns.
4. INPUT OPTICAL POWER IS NORMALIZED TO
CENTER OF DATA SYMBOL.
A duplex cable 10 meters long
assembled with 62.5/125 µm
fiber and Duplex Push-Pull ST
connector plugs on both ends.
5. NOTE 20 AND 21 APPLY.
137