Aging Rate
GENERAL CHARACTERISTICS
<±1 ppm/year
Connector
DIMENSIONS
350 mm (13.78 in.) W, 185 mm (7.28 in.) H, 395 mm (15.5 in.) D
including handle
BNC female
Weight
External Input
-5 dBm to +15 dBm
<12 kg/26.5 lbs (without options)
Warm-up Time
INTERFACES
15 minutes for specified accuracy
GPIB
POWER REQUIREMENTS
Conforms to IEEE 488.1 – 1987, 488.2 – 1992
Voltage
Subsets
90 to 250 VAC ±10 %
Frequency
SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, C0, LE0, TE0
RS-232C
50-60 Hz
Full Duplex
Baud Rate
Power Consumption
100 W max without options fitted
110 bps, 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps,
9600 bps, 19.2 kbps, 38.4 kbps, 57.6 kbps, 115.2 kbps
HARDWARE OPTIONS
Parity Check
Odd, Even or None
Data Length
High Stability Timebase (Option 03)
Temperature Stability
<±0.2 ppm
7 bit or 8 bit selectable
Stop Bits
Ageing Rate
1 bit or 2 bit
<±0.1 ppm/year
Protocol
Quasi-Peak Detector (Option 04)
None, Xon-Xoff, RTS-CTS, DTR-DSR
Quasi-Peak detector and EMC filters
ENVIRONMENTAL
RBW
Frequency Range
Charge Time (ms)
9 kHz Band B
150 kHz to 30 MHz
1 ±20%
120 kHz Band C
30 MHz to 1 GHz
1 ±20%
Operating
0 to 40°C
Discharge Time (ms) 160 ±20%
Display Time (ms) 160 ±20%
550 ±20%
100 ±20%
Storage
-20 to +60°C
Temperature & Humidity
Digital Resolution Bandwidth Filters (Option 05)
Meets MIL-T-28800E for Type 2, Class 5, non-condensing (85% oper-
ating, 90 % storage)
Bandwidths
Vibration/Shock
100 Hz, 30 Hz, 10 Hz
Meets MIL-T-28800E for Type 2, Class 5
Altitude
Bandwidth accuracy
±20%
Selectivity (-60 dB/-3 dB)
<5:1
Operational up to 3,000 meters, non-operational to 12,200 meters
Maximum span
1 MHz
PRODUCT SAFETY
Conforms to EN61010-1 for Class 1 portable equipment and is for use
in a pollution degree 2 environment. The instrument is designed to
operate from an Installation Category II.
Sweep times for 10 kHz span
RBW 100 Hz
30 Hz
<0.9 sec
<3 sec
10 Hz
<4.5 sec
ELECTROMAGNETIC COMPATABILITY
Displayed Average Noise Levels (DANL) between 1 MHz and 13 GHz
reduces DANL by typically 5 dB from the values in the 300 Hz
resolution bandwidth filter.
Complies with the limits specified in the following standard:
EN61326
For the very latest specifications visit www.aeroflex.com
AEROFLEX [ AEROFLEX CIRCUIT TECHNOLOGY ]
