ADSP-BF531/ADSP-BF532
0xFFFF FFFF
CORE MMR REGISTERS (2M BYTE)
0xFFE0 0000
SYSTEM MMR REGISTERS (2M BYTE)
0xFFC0 0000
RESERVED
0xFFB0 1000
SCRATCHPAD SRAM (4K BYTE)
RESERVED
0xFFA1 4000
INSTRUCTION SRAM/CACHE (16K BYTE)
0xFFA1 0000
INSTRUCTION SRAM (32K BYTE)
0xFFA0 8000
RESERVED
0xFFA0 0000
RESERVED
0xFF90 8000
DATA BANK B SRAM/CACHE (16K BYTE)
0xFF90 4000
RESERVED
0xFF80 8000
DATA BANK A SRAM/CACHE (16K BYTE)
0xFF80 4000
RESERVED
0xEF00 0000
0x2040 0000
ASYNC MEMORY BANK 3 (1M BYTE)
0x2030 0000
ASYNC MEMORY BANK 2 (1M BYTE)
0x2020 0000
ASYNC MEMORY BANK 1 (1M BYTE)
0x2010 0000
ASYNC MEMORY BANK 0 (1M BYTE)
0x2000 0000
RESERVED
0x0800 0000
SDRAM MEMORY (16M BYTE TO 128M BYTE)
0x0000 0000
EXTERNAL MEMORY MAP
INTERNAL MEMORY MAP
• Exceptions – Events that occur synchronously to program
flow (i.e., the exception will be taken before the instruction
is allowed to complete). Conditions such as data alignment
violations and undefined instructions cause exceptions.
• Interrupts – Events that occur asynchronously to program
flow. They are caused by input pins, timers, and other
peripherals, as well as by an explicit software instruction.
Each event type has an associated register to hold the return
address and an associated return-from-event instruction. When
an event is triggered, the state of the processor is saved on the
supervisor stack.
The ADSP-BF531/ADSP-BF532 processor event controller con-
sists of two stages, the core event controller (CEC) and the
system interrupt controller (SIC). The core event controller
works with the system interrupt controller to prioritize and con-
trol all system events. Conceptually, interrupts from the
peripherals enter into the SIC, and are then routed directly into
the general-purpose interrupts of the CEC.
0xFFB0 0000
RESERVED
Core Event Controller (CEC)
The CEC supports nine general-purpose interrupts (IVG15–7),
in addition to the dedicated interrupt and exception events. Of
these general-purpose interrupts, the two lowest priority inter-
rupts (IVG15–14) are recommended to be reserved for software
interrupt handlers, leaving seven prioritized interrupt inputs to
support the peripherals of theADSP-BF531/ADSP-BF532 pro-
cessor.
describes the inputs to the CEC, identifies their
names in the event vector table (EVT), and lists their priorities.
Table 2. Core Event Controller (CEC)
Priority
(0 is Highest)
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Event Class
Emulation/Test Control
Reset
Nonmaskable Interrupt
Exception
Reserved
Hardware Error
Core Timer
General Interrupt 7
General Interrupt 8
General Interrupt 9
General Interrupt 10
General Interrupt 11
General Interrupt 12
General Interrupt 13
General Interrupt 14
General Interrupt 15
EVT Entry
EMU
RST
NMI
EVX
IVHW
IVTMR
IVG7
IVG8
IVG9
IVG10
IVG11
IVG12
IVG13
IVG14
IVG15
Figure 3. ADSP-BF532 Internal/External Memory Map
0xFFFF FFFF
CORE MMR REGISTERS (2M BYTE)
0xFFE0 0000
SYSTEM MMR REGISTERS (2M BYTE)
0xFFC0 0000
RESERVED
0xFFB0 1000
SCRATCHPAD SRAM (4K BYTE)
0xFFB0 0000
RESERVED
INSTRUCTION SRAM/CACHE (16K BYTE)
0xFFA1 0000
RESERVED
0xFFA0 C000
INSTRUCTION SRAM (16K BYTE)
0xFFA0 8000
RESERVED
0xFFA0 0000
RESERVED
0xFF90 8000
RESERVED
0xFF90 4000
RESERVED
0xFF80 8000
DATA BANK A SRAM/CACHE (16K BYTE)
0xFF80 4000
RESERVED
0xEF00 0000
0x2040 0000
ASYNC MEMORY BANK 3 (1M BYTE)
0x2030 0000
ASYNC MEMORY BANK 2 (1M BYTE)
0x2020 0000
ASYNC MEMORY BANK 1 (1M BYTE)
0x2010 0000
ASYNC MEMORY BANK 0 (1M BYTE)
0x2000 0000
RESERVED
0x0800 0000
SDRAM MEMORY (16M BYTE TO 128M BYTE)
0x0000 0000
EXTERNAL MEMORY MAP
INTERNAL MEMORY MAP
0xFFA1 4000
RESERVED
System Interrupt Controller (SIC)
The system interrupt controller provides the mapping and rout-
ing of events from the many peripheral interrupt sources to the
prioritized general-purpose interrupt inputs of the CEC.
Page 7 of 60 |
August 2006
Figure 4. ADSP-BF531 Internal/External Memory Map
Rev. D |
AD [ ANALOG DEVICES ]
