ADM2483
PACKAGE CHARACTERISTICS
Table 4.
Parameter
Resistance (Input-Output)
Capacitance (Input-Output)
Input Capacitance
Input IC Junction-to-Case Thermal Resistance
Output IC Junction-to-Case Thermal Resistance
1
2
Symbol
R
I-O
C
I-O
C
I
θ
JCI
θ
JCO
Min
Typ
10
12
3
4
33
28
Max
Unit
Ω
pF
pF
°C/W
°C/W
Test Conditions
f = 1 MHz
Thermocouple located at center of package
underside
Thermocouple located at center of package
underside
Device considered a 2-terminal device: Pins 1, 2, 3, 4, 5, 6, 7, and 8 shorted together, and Pins 9, 10, 11, 12, 13, 14, 15, and 16 shorted together.
Input capacitance is from any input data pin to ground.
REGULATORY INFORMATION
The ADM2483 has been approved by the following organizations:
Table 5.
UL
Recognized under 1577 component
recognition program
CSA
Approved under CSA Component
Acceptance Notice #5A
VDE
Certified according to DIN EN 60747-5-2
(VDE 0884 Part 2): 2003-01
Complies with DIN EN 60747-5-2
(VDE 0884 Part 2): 2003-01,
DIN EN 60950 (VDE 0805): 2001-12;
EN 60950:2000
File 2471900-4880-0001
File E214100
1
2
File 205078
In accordance with UL1577, each ADM2483 is proof tested by applying an insulation test voltage
≥3000
V rms for 1 sec (current leakage detection limit = 5 µA).
In accordance with VDE 0884, each ADM2483 is proof tested by applying an insulation test voltage
≥1050
V
PEAK
for 1 sec (partial discharge detection limit = 5 pC).
INSULATION AND SAFETY-RELATED SPECIFICATIONS
Table 6.
Parameter
Rated Dielectric Insulation Voltage
Minimum External Air Gap (Clearance)
Minimum External Tracking (Creepage)
Minimum Internal Gap (Internal Clearance)
Tracking Resistance (Comparative Tracking Index)
Isolation Group
Symbol
L(I01)
L(I02)
Value
2500
7.45 min
8.1 min
0.017 min
>175
IIIa
Unit
V rms
mm
mm
mm
V
Conditions
1-minute duration
Measured from input terminals to output
terminals, shortest distance through air
Measured from input terminals to output
terminals, shortest distance along body
Insulation distance through insulation
DIN IEC 112/VDE 0303 Part 1
Material Group (Table 1 in DIN VDE 0110,1/89)
CTI
Rev. B | Page 6 of 20