LC2MOS 4-/8-Channel
High Performance Analog Multiplexers
ADG408/ADG409
FUNCTIONAL BLOCK DIAGRAMS
FEATURES
44 V supply maximum ratings
VSS to VDD analog signal range
Low on resistance (100 Ω maximum)
Low power (ISUPPLY < 75 μA)
Fast switching
Break-before-make switching action
Plug-in replacement for DG408/DG409
ADG408
ADG409
S1
S1A
S4A
DA
DB
D
S1B
S4B
S8
APPLICATIONS
1-OF-8
1-OF-4
Audio and video routing
Automatic test equipment
Data acquisition systems
Battery-powered systems
Sample-and-hold systems
Communication systems
DECODER
DECODER
A0 A1 A2 EN
A0 A1 EN
Figure 1.
GENERAL DESCRIPTION
PRODUCT HIGHLIGHTS
The ADG408/ADG409 are monolithic CMOS analog multiplexers
comprising eight single channels and four differential channels,
respectively. The ADG408 switches one of eight inputs to a
common output as determined by the 3-bit binary address lines
A0, A1, and A2. The ADG409 switches one of four differential
inputs to a common differential output, as determined by the
2-bit binary address lines A0 and A1. An EN input on both devices
is used to enable or disable the device. When the device is disabled,
all channels are switched off.
1. Extended Signal Range. The ADG408/ADG409 are
fabricated on an enhanced LC2MOS process, giving an
increased signal range that extends to the supply rails.
2. Low Power Dissipation.
3. Low RON
.
4. Single-Supply Operation. For applications where the
analog signal is unipolar, the ADG408/ADG409 can be
operated from a single rail power supply. The parts are
fully specified with a single 12 V power supply and remain
functional with single supplies as low as 5 V.
The ADG408/ADG409 are designed on an enhanced LC2MOS
process that provides low power dissipation yet gives high
switching speed and low on resistance. Each channel conducts
equally well in both directions when on and has an input signal
range that extends to the supplies. In the off condition, signal
levels up to the supplies are blocked. All channels exhibit break-
before-make switching action, preventing momentary shorting
when switching channels. Inherent in the design is low
charge injection for minimum transients when switching the
digital inputs.
The ADG408/ADG409 are improved replacements for the
DG408/DG409 analog multiplexers.
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2006 Analog Devices, Inc. All rights reserved.
ADI [ ADI ]
