AD8138
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
±
5.5 V
V
OCM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
±
V
S
Internal Power Dissipation . . . . . . . . . . . . . . . . . . . . 550 mW
θ
JA2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155°C/W
Operating Temperature Range . . . . . . . . . . . –40°C to +85°C
Storage Temperature Range . . . . . . . . . . . . –65°C to +150°C
Lead Temperature (Soldering 10 sec) . . . . . . . . . . . . +300°C
NOTES
1
Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only, functional operation of the
device at these or any other conditions above listed in the operational section of this
specification is not implied. Exposure to Absolute Maximum Ratings for any
extended periods may affect device reliability.
2
Thermal resistance measured on SEMI standard 4-layer board.
ABSOLUTE MAXIMUM RATINGS
1
PIN FUNCTION DESCRIPTIONS
Pin No. Name
1
2
–IN
V
OCM
Function
3
4
5
6
7
8
R
F
= 499
R
G
= 499
49.9
R
G
= 499
24.9
Negative Input Summing Node.
Voltage applied to this pin sets the common-
mode output voltage with a ratio of 1:1. For
example, +1 V dc on V
OCM
will set the dc
bias level on +OUT and –OUT to +1 V.
V+
Positive Supply Voltage.
+OUT Positive Output. Note: the voltage at –D
IN
is
inverted at +OUT.
–OUT Negative Output. Note: the voltage at +D
IN
is inverted at –OUT.
V–
Negative Supply Voltage.
NC
No Connect.
+IN
Positive Input Summing Node
PIN CONFIGURATION
–IN
1
8 +IN
7 NC
6 V–
5 –OUT
AD8138
R
F
= 499
R
L,dm
= 499
Figure 1. Basic Test Circuit
V
OCM
2
V+ 3
+OUT 4
AD8138
NC = NO CONNECT
ORDERING GUIDE
Model
AD8138AR
AD8138AR-REEL
1
AD8138AR-REEL7
2
AD8138-EVAL
NOTES
1
13" Reels of 2500 each.
2
7" Reels of 750 each.
Temperature Range
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
Package Descriptions
8-Lead SOIC
13" Tape and Reel
7" Tape and Reel
Evaluation Board
Package Options
SO-8
SO-8
SO-8
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the AD8138 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
–4–
REV. A
AD [ ANALOG DEVICES ]
