STANDARD MICROCIRCUIT DRAWING BULLETIN
DATE: 12-10-09
Approved sources of supply for SMD 5962-89542 are listed below for immediate acquisition information only and
shall be added to MIL-HDBK-103 and QML-38535 during the next revision. MIL-HDBK-103 and QML-38535 will be
revised to include the addition or deletion of sources. The vendors listed below have agreed to this drawing and a
certificate of compliance has been submitted to and accepted by DLA Land and Maritime -VA. This information
bulletin is superseded by the next dated revision of MIL-HDBK-103 and QML-38535. DLA Land and Maritime
maintains an online database of all current sources of supply at http://www.landandmaritime.dla.mil/Programs/Smcr/.
Standard
microcircuit drawing
PIN 1/
Vendor
CAGE
number
Vendor
similar
PIN 2/
5962-8954201GA
5962-8954201PA
5962-8954202GA
5962-8954203VGA
5962-8954203VHA
5962-8954203VPA
5962R8954203VGA
5962R8954203VHA
5962R8954203VPA
3/
3/
OP-15AJ/883
OP-15AZ/883
3/
OP-15BJ/883
3/
OP-15AJ/QMLV
OP-15AL/QMLV
OP-15AZ/QMLV
OP-15AJ/QMLR
OP-15AL/QMLR
OP-15AZ/QMLR
3/
3/
24355
24355
24355
1/ The lead finish shown for each PIN representing
a hermetic package is the most readily available
from the manufacturer listed for that part. If the
desired lead finish is not listed contact the vendor
to determine its availability.
2/ Caution. Do not use this number for item
acquisition. Items acquired to this number may not
satisfy the performance requirements of this drawing.
3/ Not available from an approved source of supply.
Vendor CAGE
number
Vendor name
and address
24355
Analog Devices
Route 1 Industrial Park
PO Box 9106
Norwood, MA 02062
Point of contact: 7910 Triad Center Drive
Greensboro, NC 27409-9605
The information contained herein is disseminated for convenience only and the
Government assumes no liability whatsoever for any inaccuracies in the
information bulletin.