1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows:
Outline letter
Descriptive designator
Terminals
Package style
P
2
GDIP1-T8 or CDIP2-T8
CQCC1-N20
8
20
Dual-in-line package
Square leadless chip carrier
1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535,
appendix A for device class M.
1.3 Absolute maximum ratings. 1/
Supply voltage (±V ) ....................................................................................... ±18 V
S
Common-mode input voltage .......................................................................... ±V
S
Output short circuit duration ............................................................................ Indefinite
Differential input voltage ................................................................................. +V and –V
S
S
Internal power dissipation (P ): 2/
D
Case P ......................................................................................................... 1.3 W
Case 2 ......................................................................................................... 1.0 W
Junction temperature (T ) ............................................................................... +175°C
J
Lead temperature (soldering, 60 seconds) ...................................................... +300°C
Storage temperature range ............................................................................. -65°C to +150°C
Thermal resistance, junction-to-case (θ ):
JC
Cases P and 2 ............................................................................................. +35°C/W
Thermal resistance, junction-to-ambient (θ ):
JA
Case P ......................................................................................................... +110°C/W
Case 2 ......................................................................................................... +100°C/W
1.4 Recommended operating conditions.
Positive supply voltage (+V ) .......................................................................... +15 V
S
Negative supply voltage (-V ) ......................................................................... -15 V
S
Ambient operating temperature range (T ) ..................................................... -55°C to +125°C
A
1.5 Radiation features.
Maximum total dose available (dose rate = 50 – 300 rads(Si)/s):
Device type 01 ............................................................................................. 100 krads(Si) 3/
Maximum total dose available (dose rate ≤ 10 mrads(Si)/s):
Device type 02 ............................................................................................. 50 krads(Si) 4/
_____
1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the
maximum levels may degrade performance and affect reliability.
2/ Maximum internal power dissipation is specified so that T does not exceed +175°C at an ambient temperature of +25°C.
J
Derate the P package at 8.7 mW/°C. Derate the 2 package at 10 mW/°C.
3/ Device type 01 may be dose rate sensitive in a space environment and may demonstrate enhanced low dose rate effects.
Radiation end point limits for the noted parameters are guaranteed only for the conditions specified in MIL-STD-883,
method 1019, condition A.
4/ Device type 02 radiation end point limits for the noted parameters are guaranteed only for the conditions specified in
MIL-STD-883 method 1019, condition D.
SIZE
STANDARD
5962-89644
A
MICROCIRCUIT DRAWING
DLA LAND AND MARITIME
REVISION LEVEL
SHEET
COLUMBUS, OHIO 43218-3990
D
3
DSCC FORM 2234
APR 97
ADI [ ADI ]
