OP470
ABSOLUTE MAXIMUM RATINGS1
3
Package Type
ꢄJA
ꢄJC
10
33
23
Unit
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18 V
Differential Input Voltage2 . . . . . . . . . . . . . . . . . . . . . . ±1.0 V
Differential Input Current2 . . . . . . . . . . . . . . . . . . . . ±25 mA
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . Supply Voltage
Output Short-Circuit Duration . . . . . . . . . . . . . . .Continuous
Storage Temperature Range
P, Y Package . . . . . . . . . . . . . . . . . . . . . . –65∞C to +150∞C
Lead Temperature Range (Soldering 60 sec) . . . . . . . . . 300∞C
Junction Temperature (Tj) . . . . . . . . . . . . . –65∞C to +150∞C
Operating Temperature Range
14-Lead Hermetic DIP(Y) 94
∞C/W
∞C/W
∞C/W
14-Lead Plastic DIP(P)
76
88
16-Lead SOIC (S)
NOTES
1Absolute Maximum Ratings apply to both DICE and packaged parts, unless
otherwise noted.
2The OP470’s inputs are protected by back-to-back diodes. Current limiting
resistors are not used in order to achieve low noise performance. If differential
voltage exceeds ±1.0 V, the input current should be limited to ±25 mA.
3ꢀJA is specified for worst case mounting conditions, i.e., ꢀJA is specified for device
in socket for TO, CerDIP, PDIP, packages; ꢀJA is specified for device soldered to
printed circuit board for SOIC packages.
OP470A . . . . . . . . . . . . . . . . . . . . . . . . . –55∞C to +125∞C
OP470E, OP470F . . . . . . . . . . . . . . . . . . . –25∞C to +85∞C
OP470G . . . . . . . . . . . . . . . . . . . . . . . . . . –40∞C to +85∞C
+IN B
V+
+IN A
ORDERING GUIDE
Package Options
–IN A
–IN B
T
A = 25∞C
Operating
Temperature
Range
VOS max
(ꢀV)
Cerdip
14-Pin
OUT A
Plastic
OUT B
400
MIL
400
400
800
OP470AY*
OP470EY
OP470FY*
MIL
IND
IND
OUT D
–IN D
OUT C
1000
1000
OP470GP
OP470GS
XIND
XIND
*Not for new design; obsolete April 2002.
For military processed devices, please refer to the standard
Microcircuit Drawing (SMD) available at
www.dscc.dla.mil/programs/milspec/default.asp
–IN C
+IN C
V–
+IN D
DIE SIZE 0.163 ꢃ 0.106 INCH, 17,278 SQ. mm
(4.14 ꢃ 2.69 mm, 11.14 SQ. mm)
Figure 1. Dice Characteristics
SMD Part Number
ADI Equivalent
59628856501CA
596288565012A
OP470AYMDA
OP470ARCMDA
OP470ATCMDA
596288565013A
*
*
Not for new designs; obsolete April 2002.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the OP470 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. B
–5–
ADI [ ADI ]
