AD7846
OUTLINE DIMENSIONS
0.100 (2.54)
MAX
0.005 (0.13)
MIN
28
15
14
0.610 (15.49)
0.500 (12.70)
1
PIN 1
0.620 (15.75)
0.590 (14.99)
0.015 (0.38)
MIN
0.225(5.72)
MAX
1.490 (37.85) MAX
0.150 (3.81)
MIN
0.018 (0.46)
0.008 (0.20)
15°
0°
0.200 (5.08)
0.125 (3.18)
0.100
(2.54)
BSC
SEATING
PLANE
0.070 (1.78)
0.030 (0.76)
0.026 (0.66)
0.014 (0.36)
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 32. 28-Lead Ceramic Dual In-Line Package [CERDIP]
(Q-28-2)
Dimensions shown in inches and (millimeters)
1.565 (39.75)
1.380 (35.05)
28
1
15
0.580 (14.73)
0.485 (12.31)
14
0.625 (15.88)
0.600 (15.24)
0.100 (2.54)
BSC
0.195 (4.95)
0.125 (3.17)
0.250 (6.35)
MAX
0.015 (0.38)
GAUGE
PLANE
0.015
(0.38)
MIN
0.200 (5.08)
0.115 (2.92)
0.015 (0.38)
0.008 (0.20)
SEATING
PLANE
0.700 (17.78)
MAX
0.022 (0.56)
0.014 (0.36)
0.005 (0.13)
MIN
0.070 (1.78)
0.050 (1.27)
COMPLIANT TO JEDEC STANDARDS MS-011
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
CORNER LEADS MAY BE CONFIGURED AS WHOLE LEADS.
Figure 33. 28-Lead Plastic Dual In-Line Package [PDIP]
Wide Body
(N-28-2)
Dimensions shown in inches and (millimeters)
Rev. G | Page 20 of 24
ADI [ ADI ]
