ADDAC80/ADDAC85/ADDAC87
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
24-Lead Side Brazed Ceramic DIP for Hybrid (DH-24A)
SEE NOTE 5
0.098 (2.49) MAX
13
0.005 (0.13) MIN
24
0.600 (14.70)
0.580 (14.21)
PIN 1
SEE NOTE 1
1
12
SEE NOTE 3
0.075 (1.91)
0.015 (0.38)
1.212 (29.69) MAX
0.225 (5.72)
MAX
0.200 (5.08)
0.120 (3.05)
0.180
(4.57)
MIN
0.015 (0.38)
0.008 (0.20)
SEATING
PLANE
0.070 (1.78)
0.030 (0.76)
0.023 (0.58)
0.014 (0.36)
0.100 (2.54)
BSC
0.620 (15.75)
0.590 (14.99)
SEE NOTE 6
SEE NOTE 4, 7 SEE NOTE 2
NOTES
1. INDEX AREA; A NOTCH OR A LEAD ONE IDENTIFICATION MARK IS LOCATED ADJACENT TO LEAD ONE.
2. THE MINIMUM LIMIT FOR DIMENSION MAY BE 0.023" (0.58 mm) FOR ALL FOUR CORNER LEADS ONLY.
3. DIMENSION SHALL BE MEASURED FROM THE SEATING PLANE TO THE BASE PLANE.
4. THE BASIC PIN SPACING IS 0.100" (2.54 mm) BETWEEN CENTERLINES.
5. APPLIES TO ALL FOUR CORNERS.
6. SHALL BE MEASURED AT THE CENTERLINE OF THE LEADS.
7. TWENTY TWO SPACES.
8. CONTROLLING DIMENSIONS ARE IN MILLIMETERS: INCH DIMENSIONS ARE ROUNDED-OFF MILLIMETER
EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
–14–
REV. B
ADI [ ADI ]
