Evaluation Board User Guide
UG-138
Log Data
Temperature Values
The software can save the acquired data into an Excel or text file
by clicking the Log Data button, which opens the dialog box
shown in Figure 7 From this window, you can choose to log the
ADC, the Celsius value, or both, as well as set the logging
interval (see Figure 7).
This section gives you an update of all the temperature limits
and the temperature reading of the part. These values are a
replica of the ADC values in the Set Temperature Limits
section, converted into degrees Celsius. The graph labeled
Temperature in Celsius displays the variation in time of the
high and low temperature limits as well as the current tempera-
ture in degrees Celsius.
Register Map
This section displays all the register values for the part. You can
read or write to any register by using the Read and Write
buttons (see Figure 8).
Easy Setup
The Easy Setup button restores all registers with default values.
Close
Figure 9. Data Logging
This button closes the current window and returns to the
selection window (see Figure 3).
Figure 10. Register Map
Rev. A | Page 7 of 16
ADI [ ADI ]
