Evaluation Board User Guide
UG-138
Configuration Register
DEVICE EVALUATION SOFTWARE
This tab allows you full control over the configuration register
of the selected device, as shown in Figure 7. At startup, the
evaluation software initializes the configuration register to the
default value of 0x90 (hexadecimal). For more details on how to
set the configuration register, consult the device data sheet.
After you complete the device and board selections, the evalua-
tion software loads, allowing full control over the selected
device. The software layout is the same for both the ADT7320
and ADT7420. There are three tabs in the evaluation software:
•
•
•
Configuration Register
Temperature Monitor
ADT7x20 Registers
The evaluation software also has Easy Setup and Close options.
Figure 7. Configuration Register Tab
Rev. A | Page 5 of 16
ADI [ ADI ]
