HMC546LP2E
Data Sheet
Bill of Materials
EVALUATION PCB
Table 6. Bill of Materials1
When using the circuit board in an application, generate proper
RF circuit design techniques. Ensure that signal lines have 50 Ω
impedance and that the package ground leads and exposed
paddle are connected directly to the ground plane, as shown in
Figure 26. The evaluation circuit board shown in Figure 26 is
available from Analog Devices, Inc., upon request.
Item2
J1 to J3
J4 to J6
C1 to C3
L1, L2
U1
Description
PCB mount SMA RF connector
DC pins
Capacitors, 0402 package
Inductors
HMC546LP2E transmit/receive switches
110780 evaluation PCB
PCB3
1 When requesting an evaluation board, reference the appropriate evaluation
PCB number listed in the Ordering Guide section.
2 Refer to Table 5 for component values.
3 Circuit board material: Rogers 4350.
Figure 26. Evaluation Printed Circuit Board (PCB)
Rev. E | Page 12 of 13