Preliminary v1.7
®
Actel Fusion Mixed-Signal FPGAs
Family with Optional ARM Support
®
– Frequency: Input 1.5–350 MHz, Output 0.75–350 MHz
Features and Benefits
Low Power Consumption
High-Performance Reprogrammable Flash
• Single 3.3 V Power Supply with On-Chip 1.5 V Regulator
• Sleep and Standby Low Power Modes
Technology
• Advanced 130-nm, 7-Layer Metal, Flash-Based CMOS Process
• Nonvolatile, Retains Program when Powered Off
• Live at Power-Up (LAPU) Single-Chip Solution
• 350 MHz System Performance
In-System Programming (ISP) and Security
• Secure ISP with 128-Bit AES via JTAG
®
• FlashLock to Secure FPGA Contents
Advanced Digital I/O
Embedded Flash Memory
• 1.5 V, 1.8 V, 2.5 V, and 3.3 V Mixed-Voltage Operation
• Bank-Selectable I/O Voltages – Up to 5 Banks per Chip
• User Flash Memory – 2 Mbits to 8 Mbits
– Configurable 8-, 16-, or 32-Bit Datapath
– 10 ns Access in Read-Ahead Mode
• 1 kbit of Additional FlashROM
• Single-Ended
I/O
Standards:
LVTTL,
LVCMOS
3.3 V / 2.5 V /1.8 V / 1.5 V, 3.3 V PCI
LVCMOS 2.5 V / 5.0 V Input
/ 3.3 V PCI-X, and
• Differential I/O Standards: LVPECL, LVDS, BLVDS, and M-LVDS
– Built-In I/O Registers
Integrated A/D Converter (ADC) and Analog I/O
• Up to 12-Bit Resolution and up to 600 ksps
• Internal 2.56 V or External Reference Voltage
• ADC: Up to 30 Scalable Analog Input Channels
• High-Voltage Input Tolerance: –10.5 V to +12 V
• Current Monitor and Temperature Monitor Blocks
• Up to 10 MOSFET Gate Driver Outputs
– P- and N-Channel Power MOSFET Support
– Programmable 1, 3, 10, 30 µA and 20 mA Drive Strengths
• ADC Accuracy is Better than 1%
– 700 Mbps DDR Operation
• Hot-Swappable I/Os
• Programmable Output Slew Rate, Drive Strength, and Weak
Pull-Up/Down Resistor
• Pin-Compatible Packages across the Fusion Family
SRAMs and FIFOs
• Variable-Aspect-Ratio 4,608-Bit SRAM Blocks (×1, ×2, ×4, ×9,
and ×18 organizations available)
• True Dual-Port SRAM (except ×18)
On-Chip Clocking Support
• Programmable Embedded FIFO Control Logic
• Internal 100 MHz RC Oscillator (accurate to 1%)
• Crystal Oscillator Support (32 kHz to 20 MHz)
• Programmable Real-Time Counter (RTC)
• 6 Clock Conditioning Circuits (CCCs) with 1 or 2 Integrated
PLLs
Soft ARM7™ Core Support in M7 and M1 Fusion Devices
• ARM Cortex™-M1 (without debug), CoreMP7Sd (with
debug) and CoreMP7S (without debug)
– Phase Shift, Multiply/Divide, and Delay Capabilities
Fusion Family
Fusion Devices
AFS090
AFS250
AFS600
AFS1500
CoreMP7 1
Cortex-M1 2
M7AFS600
ARM-Enabled
Fusion Devices
M1AFS250
M1AFS600
M1AFS1500
System Gates
90,000
2,304
Yes
1
250,000
6,144
Yes
1
600,000
13,824
Yes
2
1,500,000
38,400
Yes
2
Tiles (D-flip-flops)
Secure (AES) ISP
PLLs
General
Information
Globals
18
1
18
18
18
Flash Memory Blocks (2 Mbits)
Total Flash Memory Bits
FlashROM Bits
1
2
4
2 M
1 k
6
2 M
1 k
8
4 M
1 k
24
8 M
1 k
60
Memory
RAM Blocks (4,608 bits)
RAM kbits
27
5
36
108
10
270
10
Analog Quads
6
Analog Input Channels
Gate Driver Outputs
I/O Banks (+ JTAG)
Maximum Digital I/Os
Analog I/Os
15
5
18
30
30
6
10
10
Analog and I/Os
4
4
5
5
75
20
114
24
172
40
252
40
Notes:
1. Refer to the CoreMP7 datasheet for more information.
2. Refer to the Cortex-M1 product brief for more information.
October 2008
I
© 2008 Actel Corporation
ACTEL [ Actel Corporation ]
