MIL-PRF-38535K
APPENDIX C
C.5 NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
C.5.1 Additional reference documents. The documents in this section may be used as guidelines for the development of a
hardness assurance program and are not mandatory for this specification.
MIL-PRF-38534
MIL-HDBK-816
MIL-HDBK-817
MIL-HDBK-1547
SD-18
- Hybrid Microcircuits, General Specification for.
- Guidelines for Developing Radiation Hardness Assurance Device Specifications.
- System Development Radiation Hardness Assurance.
- Electronic Parts, Materials, and Processes for Space and Launch Vehicles.
- Defense Standardization Guide for Part Requirements and Applications.
(Copies of these documents are available online at http://quicksearch.dla.mil/ or from the Standardization Document Order
Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
ASTM INTERNATIONAL (ASTM)
ASTM E666
ASTM E668
- Standard Practice for Calculating Absorbed Dose from Gamma or X Radiation.
- Standard Practice for Application of Thermo Luminescence-Dosimetry (TLD) Systems for
Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices.
- Standard Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits.
- Measuring Dose Rate Response of Linear Integrated Circuits (Metric).
ASTM F744
ASTM F773
(Copies of these documents are available online at http://www.astm.org/ or from ASTM International, 100 Barr
Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959.)
119
ACTEL [ Actel Corporation ]
