ACE605
Ultra Low Dropout 2A CMOS LDO
Description
Function
Chip ENABLE Control Input. Logic enable On logic 3.3V/5V. Note that the device will be in
the unstable state if the pin is not connected
EN
VIN
GND
VOUT
Supply Input
Common Ground
Regulator Output
The output voltage is set by the internal feedback resistors when this pin grounded. If
external feedback resistors are applied, the output voltage will be:
Vout=0.6*(1+R1/R2)Volts
ADJ
Pin Description
ACE605 X X XX + H
Halogen - free
Pb - free
FM : SOP-8
Voltage output :
I : 1.05V/ADJ J : 1.2V/ADJ K : 1.8V/ADJ L : 2.5/ADJ
Package and pins type :
1 : with power pad, pinsout 1
2 : with power pad, pinsout 2
3 : without power pad, pinsout 1
4 : without power pad, pinsout 2
VER 1.3
2
ACE [ ACE TECHNOLOGY CO., LTD. ]
