AAT3169
High Efficiency 1X/1.5X/2X Charge
Pump for White LED Applications
Capacitor Characteristics
Ceramic Capacitor Materials
Ceramic composition capacitors are highly recom-
mended over all other types of capacitors for use
with the AAT3169. Ceramic capacitors offer many
advantages over their tantalum and aluminum elec-
trolytic counterparts. A ceramic capacitor typically
has very low equivalent series resistance (ESR), is
lowest cost, has a smaller PCB footprint, and is
non-polarized. Low ESR ceramic capacitors help
maximize charge pump transient response. Since
ceramic capacitors are non-polarized, they are not
prone to incorrect connection damage.
Ceramic capacitors less than 0.1µF are typically
made from NPO or C0G materials. NPO and C0G
materials generally have tight tolerance and are
very stable over temperature. Larger capacitor val-
ues are usually composed of X7R, X5R, Z5U, or
Y5V dielectric materials. Large ceramic capacitors
(i.e., greater than 2.2µF) are often available in low-
cost Y5V and Z5U dielectrics, but capacitors
greater than 1µF are not typically required for
AAT3169 applications.
Capacitor area is another contributor to ESR.
Capacitors that are physically large will have a lower
ESR when compared to an equivalent material
smaller capacitor. These larger devices can improve
circuit transient response when compared to an
equal value capacitor in a smaller package size.
Equivalent Series Resistance
ESR is an important characteristic to consider when
selecting a capacitor. ESR is resistance internal to
a capacitor that is caused by the leads, internal con-
nections, size or area, material composition, and
ambient temperature. Capacitor ESR is typically
measured in milliohms for ceramic capacitors and
can range to more than several ohms for tantalum
or aluminum electrolytic capacitors.
12
3169.2006.08.1.2
AAT [ ADVANCED ANALOG TECHNOLOGY, INC. ]
