Ai351
3.3.16. Dark signal
1) Set the temperature to 60℃ and 0.0 lx illumination condition, then measure the signal output.
2) Detect Dark signal with the following formula.
3) See figure 5 below for Test area
3.3.17 Lag
1) Set the temperature to 35℃, strobe light and AFE gain 6dB condition.
2) Adjust the Y signal output value generated by strobe light to 200mV.
3) After setting the strobe light so that it strobes with the following timing, measure the residual signal (Ylag),
and substitute the value into the following formula.
Lag [%] = (Ylag/200) X 100(%)
Figure 6. Lag test
A1 PROs Co., Ltd.
Professional Promotion Process Profit
11