CA-T SERIES - ACCESSORY
CM2 (SHV): ALL CA MODELS
MTG HARDWARE
SUPPLIED
15S SUB-MIN 'D'
RECEPTACLE
AMP # 747909-2
5.00 (127.00)
8
15
SOLDER
1.80
CUP SIDE
(45.72)
9
1
SHV
MATING
CONNECTOR
15P SUB MIN-D
PLUG (MALE)
AMP # 747841-4
1.33
(33.78)
.90 (22.86)
HIGH
VOLTAGE
.50
(12.7)
3.83 (97.28)
.05 (1.27)
THICK
SHV
2.33
(59.18)
OUTPUT
CONNECTOR
.82 (20.83)
1.300
(33.02)
GAIN
ADJUST
.25 (5.84)
1.13
2.200 (55.88)
(28.70)
ANODIZED
ALUMINUM
#4-40 MTG HOLE
4 PLACES
MOUNTING PLATE
PRPORDOUDCUTCDTEDSECSRCIRPITPIOTINON
PROGRAMMING OPTIONS / INSTRUCTIONS
1. Onboard Potentiometer: connect pins 7 to 4 and 8 to 3, turn
potentiometer to adjust high voltage.
2. Remote Potentiometer: connect wiper arm to pin 3, other sides
to pins 4 and 2.
These adapters provide convenient proto-typing and evaluation during
system development and integration, and allow these modules to be
mounted to a chassis instead of designed in to a pc board.
3. Remote Analog Signal: apply programming voltage to pin 3,
return to pin 2.
Extra filtering on the input and output improves performance. A schott-
ky diode on the input provides reverse polarity protection. Input con-
nector is via a 15P SUB MIN-D plug (mate supplied) and output is via
an SHV style coaxial connector (mate supplied).
ORDERING INFORMATION:
Please note when ordering a CM2 the CA-T Series is not included and
must be ordered separately.
WWW.XPPOWER.COM
4745K01
PAGE 7