CA-T SERIES
BLOCK DIAGRAM
OPTIONS
OPTION
ORDER CODE
POSITIVE OUTPUT
p
POLARITY DESIGNATOR
NEGATIVE OUTPUT
5 VDC
N
5
INPUT VOLTAGE
12 VDC (STANDARD)
BLANK
HOW TO ORDER
PART NUMBER SELECTOR:
Model Number:
CA 10 N - 5 T
CA - Model
10 - Output Voltage (See table)
N - Polarity Designator
T - Extended Operating Temperature
5 - Input Voltage
EXAMPLE: CA10N-5T (CA - Model, 10 - Output Voltage, N - Negative, 5 - Input Voltage, T - Extended Operating Temperature)
* Notes:
5. On negative output models, voltage monitor output is a buffered representation of the programming voltage.
1. Maximum rated output current is typically available from 100% max output voltage to 50% max output voltage,
and is derated below 50% max output voltage.
2. Specifications after 1 hour warm-up, full load, at 25 C unless other wise indicated.
6. Proper thermal management techniques are required to maintain safe case temperature at maximum power output.
7. SET POINT ACCURACY refers to the ability of the unit to accurately deliver the voltage intended by the applied programming.
The resultant output voltage will be within +/-1% of that programmed.
o
3. Typical Performance
GAIN ADJUSTMENT refers to the ability to alter the gain of the circuit to bring the resultant output voltage to the programmed
setpoint. This is intended to allow compensation for set point accuracy error.
LINEARITY refers to how much the transfer function can deviate from a straight line in the absence of any set point error.
4. All grounds internally connected, except case. There should not be more than 50 volts potential between the case ground (pin 5)
and the circuit ground (pins 3 and 8). Isolated case assists low noise design efforts. Case pin must be connected to ground for
proper operation.
XP-EMCO reserves the right to make changes on products and literature, including specifications, without notice. XP-EMCO standard product models are not recommended for “copy-exact” applications or any other application restricting product
changes. “Copy-exact” options are available. Please contact an XP-EMCO sales representative for more details.
WWW.XPPOWER.COM
4745K01
PAGE 5
XPPOWER [ XP POWER LIMITED ]
