X24042
DEVICE ADDRESSING
The last bit of the slave address defines the operation to
be performed. When set to one a read operation is
selected, when set to zero a write operation is selected.
Following a start condition the master must output the
address of the slave it is accessing. The most significant
four bits of the slave address are the device type
identifier (see Figure 4). For the X24042 this is fixed as
1010[B].
Following the start condition, the X24042 monitors the
SDA bus comparing the slave address being transmit-
ted with its slave address (device type and state of the
A2 and A1 inputs). Upon a correct compare the X24042
outputs an acknowledge on the SDA line. Depending on
the state of the R/W bit, the X24042 will execute a read
or write operation.
Figure 4. Slave Address
HIGH
ORDER
DEVICE TYPE
IDENTIFIER
WORD
ADDRESS
WRITE OPERATIONS
Byte Write
1
0
1
0
A2
A1
A0 R/W
For a write operation, the X24042 requires a second
address field. This address field is the word address,
comprised of eight bits, providing access to any one of
the 512 words in the selected page of memory. Upon
receipt of the word address the X24042 responds with
an acknowledge, and awaits the next eight bits of data,
again responding with an acknowledge. The master
then terminates the transfer by generating a stop condi-
tion, at which time the X24042 begins the internal write
cycle to the nonvolatile memory. While the internal write
cycle is in progress the X24042 inputs are disabled, and
the device will not respond to any requests from the
master. Refer to Figure 5 for the address, acknowledge
and data transfer sequence.
DEVICE
ADDRESS
3849 FHD F09
The next two significant bits addresses a particular
device. A system could have up to four X24042 devices
on the bus (see Figure 10). The four addresses are
defined by the state of the A1 and A2 input.
The next bit of the slave address is an extension of the
array’s address and is concatenated with the eight bits
of address in the word address field, providing direct
access to the whole 512 x 8 array.
Figure 5. Byte Write
S
T
S
SLAVE
ADDRESS
WORD
ADDRESS
A
R
T
T
BUS ACTIVITY:
MASTER
DATA
O
P
SDA LINE
S
P
A
C
K
A
C
K
A
C
K
BUS ACTIVITY:
X24042
3849 FHD F10
5
XICOR [ XICOR INC. ]
