Industrial Power Supplies
TBL Series
15 to 150 Watt
General Specifications
Protection class
class II as per IEC/EN 61140
Case protection
IP 20 (IEC 60529)
Environment
– Vibration acc. IEC 60068-2-6;
– Shock acc. IEC 60068-2-27
3 axis, sine sweep, 10 – 55 Hz, 0.075 mm
3 axis, 15 g half sine, 11 ms
Enclosure material
Mounting
plastic FR2010-110C (UL 94V-0 rated)
DIN-rails as per EN 50022-35x15/7.5
(snap-on with self-locking spring or wall mounting
with bracket) (included)
Connection
screw terminals with combi-type screw heads
for wire size 0.5 – 1.5 mm²
Installation instructions
www.tracopower.com/products/tbl-inst.pdf
Environmental compliance – Reach
www.tracopower.com/products/tbl-reach.pdf
RoHS directive 2011/65/EU
– RoHS
Case Dimensions
59.5 (2.34)
37.1 (1.46)
Model
Width (W)
mm (inch)
Weigth
g (oz)
21.1 (0.83)
TBL 015
TBL 030
TBL 060
26.3 (1.04)
52.5 (2.07)
70.0 (2.76
100 (3.53)
160 (5.64)
230 (8.11)
Vadj
TBL 090 105.0 (4.13) 340 (12.0)
TBL 150
175 (6.89) 625 (22.0)
54.5 (2.15)
W
Dimensions in [mm], () = Inch
Tolerances: 0.5 mm ( 0.02)
Wall Mounting Bracket
Instead on a DIN-rail, the modules can be also mounted on a chassis or wall with help
of a mounting bracket which is supplied as standard with each power supply
Wiring
Description
Wire size
AC Input
all models: L, N only (2 pin terminal)
15 – 30 W models: single terminal
60 – 150 W models: double terminal
AWG 26 – 16 / 1.5 mm² max.
AWG 26 – 14 / 1.5 mm² max.
AWG 26 – 14 / 1.5 mm² max.
DC Output
DC Output
Specifications can be changed any time without notice.
Rev. 10/12
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com
Page 3 of 3
TRACOPOWER [ TRACO ELECTRONIC AG ]
