Soldering Condition
MGN1105MS-TR
4. When using a metal PCB, the solder may crack and problems may occur due to major stress on the soldered
portion caused by thermal shock. Please carry out a thorough advance verification before use. For the metal
PCB's insulation, it is recommended to use stress-reducing materials
5. The products cannot be used for hand soldering and dipping (Through the Wave) soldering.
6. When cleaning, using isopropyl alcohol is recommended. Some chemicals, including Freon substitute
detergent could corrode the surface of products, which cause discoloration, clouding, cracks and so on. Please
review the reference chart below when cleaning.
If water is used to clean (including the final cleaning process), please use pure water (not tap water),
and completely dry the LED before using. Cleaning with supersonic wave is not recommended.
Cleaning Agents
Recommended / Not recommended
Isopropyl Alcohol
Ethyl Alcohol
Pure water
Recommended
Recommended
Recommended
Trichloroethylene
Chlorothene
Acetone
x Not recommended
x Not recommended
x Not recommended
x Not recommended
Thinner
Page : 9
2017.4.26