CY28400-2
1 ms
SRC_STP
PWRDWN
DIFT(Free Running
DIFC(Free Running
DIFT (Stoppable)
DIFC (Stoppable)
Figure 9. SRC_STP = Driven, PWRDWN = Driven, OE_INV = 1
1 ms
SRC_STP
PWRDWN
DIFT(Free Running
DIFC(Free Running
DIFT (Stoppable)
DIFC (Stoppable)
Figure 10. SRC_STP = Tri-state, PWRDWN = Driven, OE_INV = 1
1 ms
SRC_STP
PWRDWN
DIFT(Free Running
DIFC(Free Running
DIFT (Stoppable)
DIFC (Stoppable)
Figure 11. SRC_STP = Tri-state, PWRDWN = Tri-state, OE_INV = 1
Output Enable Clarification
Table 6. OE Functionality
OE_INV
OE (Pin)
OE (SMBus Bit)
DIF[T/C]
Tri-State
Tri-State
Tri-State
Enabled
Tri-State
Enabled
Tri-State
Tri-State
OE functionality allows for enabling and disabling individual
outputs. OE_1 and OE_6 are Active HIGH or Active LOW
inputs depending on the strapped value of the OE_INV input.
Disabling the outputs may be implemented in two ways, via
writing a ‘0’ to SMBus register bit corresponding to output of
interest or by deasserting the OE input pin. In both methods,
if SMBus registered bit has been written low or the OE pin is
deasserted or both, the output of interest will be tri-stated. (The
assertion and deassertion of this signal is absolutely
asynchronous.)
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
Rev 1.0,November 21, 2006
Page 9 of 15
SPECTRALINEAR [ SPECTRALINEAR INC ]
