ULTRA FAST RECOVERY
POWER RECTIFIER
1N6627D3A / 1N6627D3B
SCREENING OPTIONS
ORDERING INFORMATION
Space Level (JQRS/ESA) and High Reliability options are
available in accordance with the High Reliability and
Screening Options Handbook available for download from
the from the TT electronics Semelab web site.
Part numbers are built up from Type, Package Variant, and
screening level. The part numbers are extended to include
the additional options as shown below.
Type – See Main Part Number
Package Variant – See Mechanical Data
Screening Level – See Screening Options (ESA / JQRS)
ESA Quality Level Products are based on the testing
procedures specified in the generic ESCC 5000 and in the
corresponding part detail specifications.
Additional Options:
Semelab’s QR216 and QR217 processing specifications
(JQRS), in conjunction with the companies ISO 9001:2000
approval present a viable alternative to the American MIL-
PRF-19500 space level processing.
Customer Pre-Cap Visual Inspection
Customer Buy-Off visit
Data Pack
.CVP
.CVB
.DA
Solderability Samples
.SS
QR217 (Space Level Quality Conformance) is based on the
quality conformance inspection requirements of MIL-PRF-
19500 groups A (table V), B (table VIa), C (table VII) and
also ESA / ESCC 5000 (chart F4) lot validation tests.
Scanning Electron Microscopy
Radiography (X-ray)
.SEM
.XRAY
.RAD
Total Dose Radiation Test
MIL-PRF-19500 (QR217)
Group B charge
.GRPB
QR216 (Space Level Screening) is based on the screening
requirements of MIL-PRF-19500 (table IV) and also ESA
/ESCC 5000 (chart F3).
Group B destructive mechanical samples
Group C charge
.GBDM (12 pieces)
.GRPC
Group C destructive electrical samples
Group C destructive mechanical samples
.GCDE (12 pieces)
.GCDM (6 pieces)
JQRS parts are processed to the device data sheet and
screened to QR216 with conformance testing to Q217
groups A and B in accordance with MIL-STD-750 methods
and procedures.
ESA/ESCC
Lot Validation Testing (subgroup 1) charge
LVT1 destructive samples (environmental)
LVT1 destructive samples (mechanical)
Lot Validation Testing (subgroup 2) charge
LVT2 endurance samples (electrical)
Lot Validation Testing (subgroup 3) charge
LVT3 destructive samples (mechanical)
Additional Option Notes:
.LVT1
.L1DE (15 pieces)
.L1DM (15 pieces)
.LVT2
Additional conformance options are available, for example
Pre-Cap Visual Inspection, Buy-Off Visit or Data Packs.
These are chargeable and must be specified at the order
stage (See Ordering Information). Minimum order
quantities may apply.
.L2D (15 pieces)
.LVT3
.L3D (5 pieces)
1) All ‘Additional Options’ are chargeable and must be specified at order stage.
2) When Group B,C or LVT is required, additional electrical and mechanical destructive
samples must be ordered
3) All destructive samples are marked the same as other production parts unless
otherwise requested.
Alternative or additional customer specific conformance or
screening requirements would be considered. Contact
Semelab sales with enquires.
Example ordering information:
MARKING DETAILS
The following example is for the 1N6627D3 part with
package variant A, JQRS screening, additional Group C
conformance testing and a Data pack.
Parts can be laser marked with approximately 7 characters
on two lines and always includes cathode identification.
Typical marking would include part or specification number,
week of seal or serial number subject to available space and
legibility.
Part Numbers:
1N6627D3A-JQRS (Include quantity for flight parts)
1N6627D3A.GRPC (chargeable conformance option)
1N6627D3A.GCDE (charge for destructive parts)
1N6627D3A.GCDM (charge for destructive parts)
1N6627D3A.DA (charge for Data pack)
Customer specific marking requirements can be arranged at
the time of order.
Example Marking:
Customers with any specific requirements (e.g. marking or
screening) may be supplied with a similar alternative part
number (there is maximum 20 character limit to part
numbers). Contact Semelab sales with enquiries.
High Reliability and Screening Options Handbook link: http://www.semelab.co.uk/pdf/misc/documents/hirel_and_screening_options.pdf
Semelab Limited Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com
Document Number 9028
Issue 2
Page 4 of 4
Website: http://www.semelab-tt.com