M16C/62P Group (M16C/62P, M16C/62PT)
1.Overview
1.2
Performance Outline
Table 1.1 to 1.3 list Performance Outline of M16C/62P Group (M16C/62P, M16C/62PT)(128-pin version).
Table 1.1
Performance Outline of M16C/62P Group (M16C/62P, M16C/62PT)(128-pin version)
Item
Performance
M16C/62P
CPU
Number of Basic Instructions
91 instructions
Minimum Instruction Execution 41.7ns(f(BCLK)=24MHz, VCC1=3.3 to 5.5V)
Time
100ns(f(BCLK)=10MHz, VCC1=2.7 to 5.5V)
Operating Mode
Address Space
Single-chip, memory expansion and microprocessor mode
1 Mbyte (Available to 4 Mbytes by memory space expansion
function)
Memory Capacity
Port
See Table 1.4 to 1.5 Product List
Input/Output : 113 pins, Input : 1 pin
Peripheral
Function
Multifunction Timer
Timer A : 16 bits x 5 channels,
Timer B : 16 bits x 6 channels,
Three phase motor control circuit
Serial Interface
3 channels
Clock synchronous, UART, I2C bus(1), IEBus(2)
2 channels
Clock synchronous
A/D Converter
D/A Converter
DMAC
10-bit A/D converter: 1 circuit, 26 channels
8 bits x 2 channels
2 channels
CRC Calculation Circuit
Watchdog Timer
Interrupt
CCITT-CRC
15 bits x 1 channel (with prescaler)
Internal: 29 sources, External: 8 sources, Software: 4 sources,
Priority level: 7 levels
Clock Generation Circuit
4 circuits
Main clock generation circuit (*),
Subclock generation circuit (*),
On-chip oscillator, PLL synthesizer
(*)Equipped with a built-in feedback resistor.
Oscillation Stop Detection
Function
Stop detection of main clock oscillation, re-oscillation detection
function
Voltage Detection Circuit
Supply Voltage
Available (option(4)
)
Electric
Characteristics
VCC1=3.0 to 5.5 V, VCC2=2.7V to VCC1 (f(BCLK=24MHz)
VCC1=2.7 to 5.5 V, VCC2=2.7V to VCC1 (f(BCLK=10MHz)
Power Consumption
14 mA (VCC1=VCC2=5V, f(BCLK)=24MHz)
8 mA (VCC1=VCC2=3V, f(BCLK)=10MHz)
1.8µA (VCC1=VCC2=3V, f(XCIN)=32kHz, wait mode)
0.7µA (VCC1=VCC2=3V, stop mode)
Flash memory
version
Program/Erase Supply Voltage 3.3±0.3 V or 5.0±0.5 V
Program and Erase Endurance 100 times (all area)
or 1,000 times (user ROM area without block A and block 1)
/ 10,000 times (block A, block 1) (3)
Operating Ambient Temperature
-20 to 85°C,
-40 to 85°C (3)
Package
NOTES:
128-pin plastic mold LQFP
1. I2C bus is a registered trademark of Koninklijke Philips Electronics N. V.
2. IEBus is a registered trademark of NEC Electronics Corporation.
3. See Table 1.8 Product Code for the program and erase endurance, and operating ambient temperature.
In addition 1,000 times/10,000 times are under development as of Jul., 2005. Please inquire about a release
schedule.
4. All options are on request basis.
Rev.2.41 Jan 10, 2006 Page 2 of 96
REJ03B0001-0241
RENESAS [ RENESAS TECHNOLOGY CORP ]
