LNK562-564
ABSOLUTE MAXIMUM RATINGS(1,6)
DRAIN Voltage .................................................. 700 V Notes:
PeakDRAINCurrent...................................200mA(375 mA)(2) 1. All voltages referenced to SOURCE, TA = 25 °C.
Peak Negative Pulsed Drain Current (see Fig. 10) ...100 mA(3) 2. The higher peak DRAIN current is allowed while the
FEEDBACK Voltage .........................................-0.3 V to 9 V
DRAIN voltage is simultaneously less than 400 V.
FEEDBACK Current.............................................100 mA 3. Duration not to exceed 2 µs.
BYPASS Voltage ..........................................-0.3 V to 9 V 4. Normally limited by internal circuitry.
StorageTemperature..........................................-65°C to150°C 5. 1/16 in. from case for 5 seconds.
OperatingJunctionTemperature(4) .....................-40°C to150°C 6. Maximum ratings specified may be applied, one at a time,
Lead Temperature(5) ........................................................260 °C
without causing permanent damage to the product.
Exposure to Absolute Maximum Rating conditions for
extended periods of time may affect product reliability.
THERMAL IMPEDANCE
Thermal Impedance: P or G Package:
Notes:
(θJA) ........................... 70 °C/W(2); 60 °C/W(3) 1. Measured on pin 2 (SOURCE) close to plastic interface.
(θJC)(1) ............................................... 11 °C/W 2. Soldered to 0.36 sq. in. (232 mm2), 2 oz. (610 g/m2) copper clad.
3. Soldered to 1 sq. in. (645 mm2), 2 oz. (610 g/m2) copper clad.
Conditions
SOURCE = 0 V; TJ = -40 to 125 °C
Parameter
Symbol
Min
Typ
Max
Units
See Figure 7
(Unless Otherwise Specified)
CONTROL FUNCTIONS
LNK562
61
77
93
66
83
71
89
Output
fOSC
Frequency
TJ = 25 °C
VFB =1.69 V
Average
LNK563
LNK564
kHz
%
100
107
Ratio of Output
Frequency At Auto-
Restart to fOSC
fOSC(AR)
TJ = 25 °C, VFB = VFB(AR)
48
Peak-Peak Jitter, TJ = 25 °C
S2 Open
5
%
%
Frequency Jitter
Maximum Duty
Cycle
DCMAX
66
56
70
FEEDBACK Pin
Turnoff Threshold
Current
TJ = 25 °C
See Note A
IFB
70
84
µA
FEEDBACK Pin
Voltage at Turnoff
Threshold
TJ = 0 to 125 °C
See Note A
VFB
1.60
1.69
1.78
V
VFB ≥ 2 V
(MOSFET Not Switching)
See Note B
IS1
160
220
220
260
µA
µA
DRAIN Supply
Current
FEEDBACK Open
(MOSFET Switching)
See Notes B, C
IS2
F
10/05
8
POWERINT [ Power Integrations ]
