POE36D – 1AT Characteristics
INPUT:
DC Input Voltage Range
36 to 72VDC
WWW.PHIHONG.COM
Immunity
ESD:
RS:
EFT:
Surge:
CS:
EN61000-4-2. Level 3
EN61000-4-3. Level 3
EN61000-4-4. Level 2
EN61000-4-5. Level 3
EN61000-4-6. Level 3
DC Input Current
1.2A (DC) maximum for 36VDC
OUTPUT:
Total Output Power
33.6W at 56VDC
Insulation Resistance
Primary to Secondary: >10M OHM
500VDC
Primary to Field Ground: >10M OHM
500VDC
DC Offset
No data degradation with DC imbalance
18mA
FEATURES:
Cisco
Efficiency
80% (typical) at maximum load
No extern parts required for Legacy devices:
VoIP Phones:7910, 7912, 7940, 7960
Access Points:1040, 1140, 1250, 1260, 3500
Ripple and Regulation
100mV maximum
Over Voltage/Current, Short Circuit
Protection
Transient O/P Voltage Protection
60V maximum at switch on and off
The output can be shorted permanently
without damage
ENVIRONMENTAL:
Temperature
Indicators
Green LED 1: Input power “ON”
Green LED 2: Valid IEEE8-2.3at load
detected and connected “PoE PLUS”
Green LED 3: Valid IEEE802.3af load
detected and connected
Operation
-20 to +50°C
-25 to +85°C
5 to 90%
Non-operation
Humidity
EMC
FCC Part 15 Class B
EN55022 Class B
Input Connector
– Anytek OQ0355510000G
Mate – Anytek TJ0350520000G or
TJ035152000G. Anytek is part of Giga-Way
Technology Corp
Isolation Test
Primary to Secondary: 2121VDC for 1
minute, 10mA
Primary to Field Ground: 2121VDC for 1
minute, 10mA
Output Connection
+pins 3, 6
Output to Field Ground: 2121VDC for 1
minute, 10mA
-pins 1 ,2