FEDL70512-04
OKI Semiconductor
ML70512
SPECIFICATIONS
Process
Package
0.16 µm CMOS (5-layer metal wire)
83-pin WCSP (P-VFLGA83-6.22×6.22-0.50-W)
(Dimensions: 6.22 mm × 6.22 mm × 0.48 mm; pin pitch: 0.50 mm)
84-pin BGA (P-LFBGA84-0909-0.80)
(Dimensions: 9 mm × 9 mm × 1.5 mm; pin pitch: 0.80 mm)
23.4 mA (24 MHz operation)
Supply current
Operating voltage ranges
2.70 to 3.6 V for input-output, 1.65 to 1.95 V for internal circuits
24 MHz
Operating frequency
Built-in ROM size
Built-in RAM size
Input clocks
384 KB (for ARM program)
72 KB
12 MHz, 13 MHz, or 16 MHz (system clock)
32 kHz or 32.768 kHz (LPO clock)
OKI RF-LSI interface (ML7050, ML70561)
SKYWORKS RF-LSI interface (CX72303)
BROADCOM RF-LSI interface (BCM2002X)
UART interface (up to 921.6 Kbps)
General-purpose I/O interface (Bits 0 and 1 are used as a pin for I2C bus
interface
RF-LSI interface
Installed interfaces
depending on software installed)
PCM interface (PCM Linear/A-law/µ-law can be selected)
DETACH interface
Timers
16-bit auto reload timer (1ch)
18-bit auto reload timer (3ch)
Interrupt controller
Clock control circuit
11 causes
Crystal oscillator circuit (12 MHz, 13 MHz, or 16 MHz, 32 kHz or 32.768
kHz)
Internal PLL
2/29
OKI [ OKI ELECTRONIC COMPONETS ]
