FEDL63295A-02
Semiconductor
1
ML63295A
• Ports
Input ports:
Selectable as input pull-up resistor/input pull-down resistor/high impedance input.
Output ports:
Selectable as P-channel open drain output/N-channel open drain output/high-impedance output/CMOS
output.
I/O ports:
Selectable as input pull-up resistor/input pull-down resistor/high impedance input.
Selectable as P-channel open drain output/N-channel open drain output/high-impedance output/
CMOS output.
Can be interfaced with external peripherals that use a different power supply than this device uses.
Number of ports:
Input port
: 2 ports × 4 bits
Output port
: 6 ports × 4 bits
Input-output port
: 6 ports × 4 bits
• Melody output
Melody frequency
Tone length
Tempo
Melody data
Buzzer driver signal output
• LCD driver
Number of segments
Duty
Bias
Frame frequency
Contrast
Display modes
: 529 Hz to 2979 Hz
: 63 varieties
: 15 varieties
: Stored in program memory
: 4 kHz
: 3072 Max. (96 SEG. × 32 COM.)
: Selectable as 1/2, 1/4, 1/6, 1/8, 1/10, 1/12, 1/14, 1/16, 1/18, 1/20,
1/22, 1/24, 1/26, 1/28, 1/30, or 1/32 duty
: Selectable as 1/5 or 1/6 bias (regulator built-in)
: ex. 64 Hz (at 1/32 duty), 128 Hz (at 1/16 duty), 256 Hz (at 1/8
duty), 512 Hz (at 1/4 duty), 1024 Hz (at 1/2 duty)
: 16 levels adjustable
: Selectable as all-ON mode/all-OFF mode/power down
mode/normal display mode
: (8 bits)
×
(8 bits)
→
Product (16 bits)
: (16 bits)/(8 bits)
→
Quotient (16 bits), Remainder (8 bits)
• Multiplier/divider circuit
Multiplier
Divider
• System reset function
System reset through RESET pin
System reset by power-on detection
System reset by low-speed oscillation halt
• Battery check
Low-voltage supply check
The value of the judgment voltage is selected by the software (by setting the LD1 and LD0 bits of
BLDCON).
LD1
1
1
LD0
0
1
Judgment voltage (V)
4.5
±0.1
5.1
±0.1
Remarks
Ta = 25°C
Ta = 25°C
2/38
OKI [ OKI ELECTRONIC COMPONETS ]
