Tantalum Through-Hole Capacitors – Hermetically Sealed
T550 Axial Polymer Hermetic Seal (PHS) 105ºC and DLA Series
Ordering Information
T
550
Series
550 =
B
107
M
025
A
T
4251
Capacitor
Class
Case Capacitance Capacitance Rated Voltage Product
Size Code (pF)
Termination
Finish
Surge
Option
Packaging
Tolerance
(VDC)
Level
Blank = Sleeved
0100 = Unsleeved
7200 = Tape &
Reel
7293 & 7443 =
Ammo
T =
B
First two
digits
K = ±10%
M = ±20%
006 = 6.3
008 = 8
A = N/A
B* = DLA
13030
Standard
reliability
T* = DLA
T = 100% Tin Blank = 25°C ±5°C, 10
(Sn)-plated
H = Tin/
lead (SnPb)
solder-
coated
Tantalum Polymer
hermetic
cycles, after constant
voltage conditioning
(KEMET standard)
4251ꢀ=ꢀ10ꢀcycles,ꢀ−55°Cꢀ
and +85°C after constant
voltage conditioning
4252 = 10 cycles,
represent
significantꢀ
figures.ꢀ
Third digit
specifiesꢀ
number of
zeros.
015 = 15
025 = 25
040 = 40
050 = 50
060 = 60
075 = 75
100 = 100
seal
13030 High (5% Pb
reliability minimum)
−55°Cꢀandꢀ+85°Cꢀ
before constant voltage
conditioning
* Only available on select parts. Refer to part number table for details.
Ordering Information – DLA Series
13030
-01
K
A
S
L
B
Drawing
Number Number Tolerance
Dash Capacitance
Lead
Length
Product
Level
Surge Current Testing
Insulation
See
Part
Number
Table
K = ±10%
A = +25°C ±5°C, 10 cycles, after constant
S = Sleeved
U = Unsleeved
L = 1.50
inches
(standard)
B = Standard reliability
T = High reliability
M = ±20% voltage conditioning (KEMET standard)
Bꢀ=ꢀ−55°C,ꢀ−5°C,ꢀ+0°Cꢀandꢀ+85°Cꢀ±5°C;ꢀ
after constant voltage conditioning.
Cꢀ=ꢀ−55°C,ꢀ−5°C,ꢀ+0°Cꢀandꢀ+85°Cꢀ±5°C;ꢀ
before constant voltage conditioning.
* Standard terminations for DLA PN's is "H" (SnPb)
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DF (120 Hz at 25°C)
ESR (100 kHz at 25°C)
−55°Cꢀtoꢀ105°C
20ꢀμFꢀtoꢀ820ꢀμFꢀatꢀ120ꢀHz/25°Cꢀ*
K Tolerance (10%), M Tolerance (20%)
6 – 100 V
ReferꢀtoꢀPartꢀNumberꢀElectricalꢀSpecificationꢀTableꢀ
ReferꢀtoꢀPartꢀNumberꢀElectricalꢀSpecificationꢀTableꢀꢀ
ReferꢀtoꢀPartꢀNumberꢀElectricalꢀSpecificationꢀTable
(at rated voltage up to +85°C and 78% of rated voltage applied at 105°C)
Leakage Current
Packaging
According MIL–PRF–39006
KEMET does not recommend storage above 85°C.
* Additional case sizes and capacitance/voltage are under development.
2
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2059_T550 • 1/12/2018