欢迎访问ic37.com |
会员登录 免费注册
发布采购

13030-02MASLT 参数 Datasheet PDF下载

13030-02MASLT图片预览
型号: 13030-02MASLT
PDF下载: 下载PDF文件 查看货源
内容描述: [Tantalum Capacitor, Tantalum (solid Polymer)]
分类和应用: 电容器
文件页数/大小: 11 页 / 1926 K
品牌: KEMET [ KEMET CORPORATION ]
 浏览型号13030-02MASLT的Datasheet PDF文件第3页浏览型号13030-02MASLT的Datasheet PDF文件第4页浏览型号13030-02MASLT的Datasheet PDF文件第5页浏览型号13030-02MASLT的Datasheet PDF文件第6页浏览型号13030-02MASLT的Datasheet PDF文件第8页浏览型号13030-02MASLT的Datasheet PDF文件第9页浏览型号13030-02MASLT的Datasheet PDF文件第10页浏览型号13030-02MASLT的Datasheet PDF文件第11页  
Tantalum Through-Hole Capacitors – Hermetically Sealed  
T550 Axial Polymer Hermetic Seal (PHS) 105ºC and DLA Series  
Recommended Voltage Derating Guidelines  
120%  
100%  
80%  
60%  
40%  
20%  
0%  
−55°Cꢀtoꢀ85°C  
85°C to 105°C  
78% of VR  
% Change in Working DC  
Voltage with Temperature  
% Change in Working DC Voltage  
with Temperature  
VR  
80%  
78%  
63%  
Recommended Maximum  
Application Voltage  
(As % of Rated Voltage)  
Recommended Maximum Application  
Voltage (As % of Rated Voltage)  
80% of VR  
63% of VR  
55  
25  
45  
85  
105  
Temperature (°C)  
Ripple Current/Ripple Voltage  
Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation  
capabilities of the device. Permissible AC ripple voltage that may be applied is limited by two criteria:  
1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor.  
ꢀ 2.ꢀTheꢀnegativeꢀpeakꢀACꢀvoltageꢀinꢀcombinationꢀwithꢀbiasꢀvoltage,ꢀifꢀany,ꢀmustꢀnotꢀexceedꢀtheꢀallowableꢀlimitsꢀspecifiedꢀ  
for reverse voltage.  
The maximum power dissipation by case size can be determined using the below left table. The maximum power dissipation  
rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the below right  
table for temperature compensation requirements.  
Using the Pmax of the device, the maximum allowable rms  
ripple current or voltage may be determined.  
Maximum Power  
Dissipation (Pmax  
mWatts at 25°C  
with +60°C Rise  
)
Case Code  
I(max) = √Pmax/R  
E(max) = Z √Pmax/R  
MILPRF–39006/22/  
KEMET  
B
25/30/31 Case Size  
I = rms ripple current (amperes)  
E = rms ripple voltage (volts)  
T2  
715  
P
max = maximum power dissipation (watts)  
R = ESR at specified frequency (ohms)  
Z = Impedance at specified frequency (ohms)  
Temperature Compensation Multipliers for  
Maximum Power Dissipation (Pmax  
)
Tꢀ≤ꢀ45°C  
45°Cꢀ<ꢀTꢀ≤ꢀ85°C  
85°Cꢀ<ꢀTꢀ≤ꢀ105°C  
The maximum power dissipation rating must be reduced with increasing  
environmental operating temperatures. Refer to the Temperature  
Compensation Multiplier table for details.  
1.00  
0.70  
0.10  
T= Environmental Temperature  
7
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com  
T2059_T550 • 1/12/2018