EM488M3244VBD
eorex
Recommended DC Operating Conditions
(VDD=3.3V0.3V, TA=0°C ~70°C, -25°C ~ +85°C)
Symbol
Parameter
Test Conditions
Max.
80
Units
Burst length=1,
tRCtRC(min.), IOL=0mA,
One bank active
Operating Current (Note 1)
mA
ICC1
250
200
uA
uA
ICC2P
CKEVIL(max.), tCK=15ns
Precharge Standby Current in
Power Down Mode
ICC2PS
CKEVIL(max.), tCK=
CKEVIL(min.), tCK=15ns,
/CSVIH(min.)
Input signals are changed
one time during 30ns
16
mA
ICC2N
Precharge Standby Current in
Non-power Down Mode
CKEVIL(min.), tCK=
,
12
mA
ICC2NS
Input signals are stable
5
4
mA
mA
ICC3P
CKEVIL(max.), tCK=15ns
Active Standby Current in
Power Down Mode
ICC3PS
CKEVIL(max.), tCK=
CKEVIL(min.), tCK=15ns,
/CSVIH(min.)
20
16
mA
mA
ICC3N
Active Standby Current in
Non-power Down Mode
Input signals are changed
one time during 30ns
CKEVIL(min.), tCK=
,
ICC3NS
Input signals are stable
Operating Current (Burst
Mode) (Note 2)
Refresh Current (Note 3)
tCCD2CLKs, IOL=0mA
85
mA
mA
ICC4
ICC5
115
tRCtRC(min.)
CKE0.2V
450 (Note 4)
Self Refresh Current
uA
ICC6
*All voltages referenced to VSS.
Note 1: ICC1 depends on output loading and cycle rates.
Specified values are obtained with the output open.
Input signals are changed only one time during tCK (min.)
Note 2: ICC4 depends on output loading and cycle rates.
Specified values are obtained with the output open.
Input signals are changed only one time during tCK (min.)
Note 3: Input signals are changed only one time during tCK (min.)
Note 4: Standard power version.
Recommended DC Operating Conditions (Continued)
Symbol
Parameter
Test Conditions
Min.
-1
Typ.
Max. Units
0VIVDDQ, VDDQ=VDD
All other pins not under test=0V
Input Leakage Current
+1
uA
IIL
Output Leakage Current
High Level Output Voltage
Low Level Output Voltage
-1.5
2.4
+1.5
uA
V
IOL
VOH
VOL
0VOVDDQ, DOUT is disabled
IO=-2mA
0.4
V
IO=+2mA
Dec. 2013
www.eorex.com
6/18
EOREX [ EOREX CORPORATION ]
