欢迎访问ic37.com |
会员登录 免费注册
发布采购

EBE25UD6ABSA 参数 Datasheet PDF下载

EBE25UD6ABSA图片预览
型号: EBE25UD6ABSA
PDF下载: 下载PDF文件 查看货源
内容描述: 256MB DDR2 SDRAM SO- DIMM [256MB DDR2 SDRAM SO-DIMM]
分类和应用: 动态存储器双倍数据速率
文件页数/大小: 21 页 / 235 K
品牌: ELPIDA [ ELPIDA MEMORY ]
 浏览型号EBE25UD6ABSA的Datasheet PDF文件第2页浏览型号EBE25UD6ABSA的Datasheet PDF文件第3页浏览型号EBE25UD6ABSA的Datasheet PDF文件第4页浏览型号EBE25UD6ABSA的Datasheet PDF文件第5页浏览型号EBE25UD6ABSA的Datasheet PDF文件第6页浏览型号EBE25UD6ABSA的Datasheet PDF文件第7页浏览型号EBE25UD6ABSA的Datasheet PDF文件第8页浏览型号EBE25UD6ABSA的Datasheet PDF文件第9页  
DATA SHEET
256MB DDR2 SDRAM SO-DIMM
EBE25UD6ABSA
(32M words
×
64 bits, 1 Rank)
Description
The EBE25UD6ABSA is 32M words
×
64 bits, 1 rank
DDR2 SDRAM Small Outline Dual In-line Memory
Module, mounting 4 pieces of 512M bits DDR2
SDRAM sealed in FBGA package. Read and write
operations are performed at the cross points of the CK
and the /CK. This high-speed data transfer is realized
by the 4 bits prefetch-pipelined architecture. Data
strobe (DQS and /DQS) both for read and write are
available for high speed and reliable data bus design.
By setting extended mode register, the on-chip Delay
Locked Loop (DLL) can be set enable or disable. This
module provides high density mounting without utilizing
surface mount technology. Decoupling capacitors are
mounted beside each FBGA on the module board.
Note: Do not push the components or drop the
modules in order to avoid mechanical defects,
which may result in electrical defects.
Features
200-pin socket type small outline dual in line memory
module (SO-DIMM)
PCB height: 30.0mm
Lead pitch: 0.6mm
Lead-free
1.8V power supply
Data rate: 533Mbps/400Mbps (max.)
1.8V (SSTL_18 compatible) I/O
Double-data-rate architecture: two data transfers per
clock cycle
Bi-directional, differential data strobe (DQS and
/DQS) is transmitted/received with data, to be used in
capturing data at the receiver
DQS is edge aligned with data for READs: center-
aligned with data for WRITEs
Differential clock inputs (CK and /CK)
DLL aligns DQ and DQS transitions with CK
transitions
Commands entered on each positive CK edge: data
and data mask referenced to both edges of DQS
Four internal banks for concurrent operation
(Component)
Data mask (DM) for write data
Burst lengths: 4, 8
/CAS Latency (CL): 3, 4, 5
Auto precharge operation for each burst access
Auto refresh and self refresh modes
7.8µs average periodic refresh interval
Posted CAS by programmable additive latency for
better command and data bus efficiency
Off-Chip-Driver Impedance Adjustment and On-Die-
Termination for better signal quality
/DQS can be disabled for single-ended Data Strobe
operation.
Document No. E0553E21 (Ver. 2.1)
Date Published February 2006 (K) Japan
URL: http://www.elpida.com
Elpida
Memory, Inc. 2004-2006