欢迎访问ic37.com |
会员登录 免费注册
发布采购

BCM4329 参数 Datasheet PDF下载

BCM4329图片预览
型号: BCM4329
PDF下载: 下载PDF文件 查看货源
内容描述: [Bluetooth 4.0 EDR and Low Energy compliant]
分类和应用:
文件页数/大小: 55 页 / 4575 K
品牌: CYPRESS [ CYPRESS ]
 浏览型号BCM4329的Datasheet PDF文件第1页浏览型号BCM4329的Datasheet PDF文件第2页浏览型号BCM4329的Datasheet PDF文件第3页浏览型号BCM4329的Datasheet PDF文件第5页浏览型号BCM4329的Datasheet PDF文件第6页浏览型号BCM4329的Datasheet PDF文件第7页浏览型号BCM4329的Datasheet PDF文件第8页浏览型号BCM4329的Datasheet PDF文件第9页  
CYW20702  
1. Overview  
The CYW20702 complies with Bluetooth Core Specification, version 4.0 and is designed for use in standard Host Controller Interface  
(HCI) UART and HCI USB applications. The combination of the Bluetooth Baseband Core (BBC), a Peripheral Transport Unit (PTU),  
and an ARM®-based microprocessor with on-chip ROM provides a complete lower layer Bluetooth protocol stack, including the Link  
Controller (LC), Link Manager (LM), and HCI.  
1.1 Major Features  
Major features of the CYW20702 include:  
Support for Bluetooth 4.0 + EDR and Low Energy (LE), including the following options:  
A whitelist size of 25.  
Enhanced Power Control  
HCI Read Encryption Key Size command  
Full support for Bluetooth 2.1 + EDR additional features:  
Secure Simple Pairing (SSP)  
Encryption Pause Resume (EPR)  
Enhance Inquiry Response (EIR)  
Link Supervision Time Out (LSTO)  
Sniff SubRating (SSR)  
Erroneous Data (ED)  
Packet Boundary Flag (PBF)  
Built-in Low Drop-Out (LDO) regulators (2)  
1.63 to 5.5V input voltage range  
1.8 to 3.3V intermediate programmable output voltage  
Integrated RF section  
Single-ended, 50 ohm RF interface  
Built-in TX/RX switch functionality  
TX Class 1 output power capability  
RX sensitivity basic rate of –88 dBm  
RX sensitivity for Low Energy of –92 dBm  
Supports maximum Bluetooth data rates over HCI UART, USB, and SPI interfaces  
Multipoint operation, with up to 7 active slaves  
Maximum of 7 simultaneous active ACL links  
Maximum of 3 simultaneous active SCO and eSCO links, with Scatternet support  
Scatternet operation, with up to 4 active piconets (with background scan and support for ScatterMode)  
High-speed HCI UART transport support  
H4 five-wire UART (four signal wires, one ground wire)  
H5 three-wire UART (two signal wires, one ground wire)  
Maximum UART baud rates of 4 Mbps  
Low-power out-of-band BT_WAKE and HOST_WAKE signaling  
VSC from host transport to UART  
Proprietary compressing scheme (allows more than 2 simultaneous A2DP packets and up to 5 devices at a time)  
HCI USB transport support  
USB version 2.0 full-speed compliant interface  
Full USB hub  
UHE (proprietary method for emulating a Human Interface Device (HID) at system bootup)  
Document Number: 002-14773 Rev. *L  
Page 4 of 55