欢迎访问ic37.com |
会员登录 免费注册
发布采购

AM29LV320DT120WNV 参数 Datasheet PDF下载

AM29LV320DT120WNV图片预览
型号: AM29LV320DT120WNV
PDF下载: 下载PDF文件 查看货源
内容描述: [Flash Memory,]
分类和应用:
文件页数/大小: 57 页 / 1066 K
品牌: CYPRESS [ CYPRESS ]
 浏览型号AM29LV320DT120WNV的Datasheet PDF文件第1页浏览型号AM29LV320DT120WNV的Datasheet PDF文件第2页浏览型号AM29LV320DT120WNV的Datasheet PDF文件第3页浏览型号AM29LV320DT120WNV的Datasheet PDF文件第5页浏览型号AM29LV320DT120WNV的Datasheet PDF文件第6页浏览型号AM29LV320DT120WNV的Datasheet PDF文件第7页浏览型号AM29LV320DT120WNV的Datasheet PDF文件第8页浏览型号AM29LV320DT120WNV的Datasheet PDF文件第9页  
D A T A S H E E T  
GENERAL DESCRIPTION  
The Am29LV320D is a 32 megabit, 3.0 volt-only flash  
memory device, organized as 2,097,152 words of 16  
bits each or 4,194,304 bytes of 8 bits each. Word  
mode data appears on DQ0–DQ15; byte mode data  
appears on DQ0–DQ7. The device is designed to be  
programmed in-system with the standard 3.0 volt VCC  
supply, and can also be programmed in standard  
EPROM programmers.  
or both. Customer Lockable parts may utilize the Se-  
cured Silicon sector as bonus space, reading and writ-  
ing like any other flash sector, or may permanently  
lock their own code there.  
The device offers complete compatibility with the  
JEDEC single-power-supply Flash command set  
standard. Commands are written to the command  
register using standard microprocessor write timings.  
Reading data out of the device is similar to reading  
from other Flash or EPROM devices.  
The device is available with an access time of 90 or  
120 ns. The devices are offered in 48-pin TSOP and  
48-ball FBGA packages. Standard control pins—chip  
enable (CE#), write enable (WE#), and output enable  
(OE#)—control normal read and write operations, and  
avoid bus contention issues.  
The host system can detect whether a program or  
erase operation is complete by using the device sta-  
tus bits: RY/BY# pin, DQ7 (Data# Polling) and  
DQ6/DQ2 (toggle bits). After a program or erase cycle  
is completed, the device automatically returns to the  
read mode.  
The device requires only a single 3.0 volt power sup-  
ply for both read and write functions. Internally gener-  
ated and regulated voltages are provided for the  
program and erase operations.  
The sector erase architecture allows memory sec-  
tors to be erased and reprogrammed without affecting  
the data contents of other sectors. The device is fully  
erased when shipped from the factory.  
Am29LV320D Features  
The Secured Silicon sector is an extra sector capa-  
ble of being permanently locked by AMD or custom-  
ers. The Secured Silicon Indicator Bit (DQ7) is  
permanently set to a 1 if the part is factory locked,  
and set to a 0 if customer lockable. This way, cus-  
tomer lockable parts can never be used to replace a  
factory locked part. Note that the Am29LV320D has  
a Secured Silicon sector size of 64 Kbytes. AMD  
devices designated as replacements or substi-  
tutes, such as the Am29LV320M, have 256 bytes.  
This should be considered during system design.  
Hardware data protection measures include a low  
VCC detector that automatically inhibits write opera-  
tions during power transitions. The hardware sector  
protection feature disables both program and erase  
operations in any combination of the sectors of mem-  
ory. This can be achieved in-system or via program-  
ming equipment.  
The device offers two power-saving features. When  
addresses are stable for a specified amount of time,  
the device enters the automatic sleep mode. The  
system can also place the device into the standby  
mode. Power consumption is greatly reduced in both  
modes.  
Factory locked parts provide several options. The Se-  
cured Silicon sector may store a secure, random 16  
byte ESN (Electronic Serial Number), customer code  
(programmed through AMD’s ExpressFlash service),  
2
Am29LV320D  
December 14, 2005