LAA108
MECHANICAL DIMENSIONS
Tape and Reel Packaging for 8-Pin Surface Mount Package
W = 16.30 max
(0.642 maxꢀ
330.2 DIA.
(13.00 DIA.ꢀ
Top Cover
1
8
Tape Thickness
0.102 MAX.
(0.004 MAX.ꢀ
Top Cover
Tape
P = 12.00
(0.472ꢀ
Ao = 10.30
(0.406ꢀ
Bo = 10.30
(0.406ꢀ
K0 = 4.90
(0.193ꢀ
K1 = 4.20
(0.165ꢀ
Embossed Carrier
User Direction of Feed
Dimensions
mm
(inchesꢀ
Embossment
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
Tape and Reel Packaging for 8 Pin Flatpack Package
W = 16.30 max
(0.642 maxꢀ
330.2 DIA.
(13.00 DIA.ꢀ
1
8
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.ꢀ
Top Cover
Tape
Bo = 10.30
(0.406ꢀ
K0 = 2.70
(0.106ꢀ
P = 12.00
(0.472ꢀ
Ao = 10.30
(0.406ꢀ
K1 = 2.00
(0.079ꢀ
Embossed Carrier
Dimensions
mm
User Direction of Feed
(inchesꢀ
Embossment
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and
product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale,
Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for
a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications
intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare,
Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-LAA108-R02
©Copyright 2009, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
11/13/09
6
CLARE [ CLARE ]
