NE3512S02
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Infrared Reflow
Soldering Conditions
Condition Symbol
IR260
Peak temperature (package surface temperature)
Time at peak temperature
: 260°C or below
: 10 seconds or less
: 60 seconds or less
: 120±30 seconds
: 3 times
Time at temperature of 220°C or higher
Preheating time at 120 to 180°C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
Partial Heating
Peak temperature (terminal temperature)
Soldering time (per side of device)
: 350°C or below
HS350
: 3 seconds or less
: 0.2%(Wt.) or below
Maximum chlorine content of rosin flux (% mass)
Caution Do not use different soldering methods together (except for partial heating).
7
Data Sheet PG10592EJ01V0DS
CEL [ CALIFORNIA EASTERN LABS ]
