JMicron/JM20329
Revision History
Version
0.8
Date
Revision Description
2007/3/20 Initialization of this document for JM20329.
2007/4/16 1. Modify pin out description
2. Remove the description about Serial Flash and Fingerprint recognition.
0.9
3. Modify the EEPROM configuration description
2007/5/3 1. Add pin description in USB suspend mode.
2. Remove the typing error of pin17 in SATA power pin
1.0
© Copyright JMicron Technology, 2007.
All Rights Reserved.
Printed in Taiwan 2007
JMicron and the JMicron Logo are trademarks of JMicron Technology Corporation in Taiwan and/or other countries.
Other company, product and service names may be trademarks or service marks of others.
All information contained in this document is subject to change without notice. The products described in this document are NOT
intended for use implantation or other life supports application where malfunction may result in injury or death to persons. The
information contained in this document does not affect or change JMicron’s product specification or warranties. Nothing in this
document shall operate as an express or implied license or environments, and is presented as an illustration. The results obtained
in other operating environments may vary.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIEDE ON AN “AS IS” BASIS. In no event will JMicron
be liable for damages arising directly or indirectly from any use of the information contained in this document.
JMicron Technology Corporation
1F, No.13, Innovation Road I,
Science Based Industrial Park
Hsinchu, Taiwan, R.O.C
For more information on JMicron products, please visit the JMicron web site at
http://www.JMicron.com or send email to sales@jmicron.com
Version 1.0
May 2007
© JMicron 2007. All rights reserved.
Page 2
Copying prohibited.
ETC [ ETC ]
